Atomik Controller Costs
1.	(1) Raspberry Pi Kit ( Model B or B+ ) – should include Wi-Fi dongle, 8GB+ SD card, power connector, USB to micro USB cable, and RPi case.
( https://www.amazon.ca/Raspberry-Model-1GB-Complete-Starter/dp/B00MV6TAJI/ref=sr_1_27?s=electronics&ie=UTF8&qid=1471560534&sr=1-27&keywords=Raspberry+Pi+B%2B+kit )   $150.00 CAD

2.	(1) NRF24L01+ Wireless Transceiver Module 2.4GHz ISM band.
(https://www.amazon.com/nRF24L01-Wireless-Transceiver-Antistatic-Compatible/dp/B00E594ZX0 )  $ 7.00 CAD

3.	NRF24L01+ Connector to RPi – (1) USB or 1394 Internal 9Pin Female to Female cable (very short) and (7) single Female 0.1" header connectors.  (http://www.moddiy.com/products/High-Quality-Sleeved-USB-9%252dPin-Internal-Female-to-Female-Cable-%2830cm%29.html ) (https://www.sparkfun.com/products/12796 )   $10.00 CAD

4.	(4) RGBWW 9W Bulbs
	( http://futlight.com/productdetails.aspx?id=158&typeid=101 )	$ 65.00 CAD (Inc Shipping)
	
5.	(4) Dual White Bulbs 
	( http://futlight.com/productdetails.aspx?id=152&typeid=101 )	$ 65.00 CAD (Inc Shipping)
	
6.	(1) RGB RF Remote
	( http://futlight.com/productdetails.aspx?id=173&typeid=143 )	$ 10.00 CAD (Inc Shipping)

Total $307.00 CAD  (240.00 USD August 2016)

Notes: I made my connector by rummaging around in an old computer case. I found a female USB internal header, and many female jumper headers. First disconnect one end of the internal USB female header. Next, remove 7 single female jumper ( 0.1” ) headers from their cables. Connect the single headers on to the unplugged end of the internal USB header. Slide the NRF24L01+ into the USB female header. Remove any unnecessary pins and cables from the USB connector. Finally plug the 7 individual connectors onto the RPI. ( Refer to the pinout diagram )

The NRF24L01+ can often be found for less than $1.00 US on eBay and Alibaba

I have tried to overestimate costs, and have priced more bulbs than needed.