? - alias for 'help' BrickTerminator- BrickTerminator CmdPerformanceTest- gettime - Get the system executing time LzmaDec - do Lzma for compress image ac - set a new config to the bootargs audio_preinit- audio_preinit - Init audio driver base - print or set address offset bdinfo - print Board Info structure bin2nand- bin2nand usbport withsparedata?1:0 binname partition_name - read binary files and restore it to nand bininfo - bininfo -print parameter information of each partition and environment bintoolini- bintoolini [usb port]: Generate ini file for nand bin tool boot - boot default, i.e., run 'bootcmd' bootargs_set- Set info exchange and set to boot args. bootcheck- bootcheck - Do boot check bootd - boot default, i.e., run 'bootcmd' bootlogo- bootlogo - Display Logo_Music bootm - boot application image from memory bootmusic- bootmusic - play music bootp - boot image via network using BOOTP/TFTP protocol bstar - bstar - update softwave system automatically via backup checkfile- check file exist in u disk,and set the partition. chpart - change active partition cleanallenv- cleanall environment variables to persistent storage cmp - memory compare cnstar - do net update from the specified file that is in oad partition config2env- Set config to environment. config_raw_io- Config the target device for raw I/O coninfo - print console devices and information costar - do oad update from the specified file that is in oad partition cp - memory copy crc32 - checksum calculation custar - do usb update from the specified file that is in usb. dbg - set debug message level. Default level is INFO dbtable_init- dbtable_init - let data is ready (logo, music, panel, ursa). dc - delete the specific cofig that is in the bootargs delay - delay time, time unit is ms destroy_logo- destroy_logo - Stop logo display dhcp - boot image via network using DHCP/TFTP protocol dont_overwrite- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to register which partition should not be overwrite dont_overwrite_free- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to free all registered partitions. dont_overwrite_init- This serial apis are for protecting the specific partitions are overwrited. ex: customer This cmd is used to init this function draw_jpg- blt_jpg - Blt JPG draw_pixel- draw_pixel - draw a pixel with color draw_progress- draw_string - draw string with color draw_rect- draw_rect - draw rect with color draw_string- draw_string - draw string with color du - du - Disable UART dynpart - dynamically calculate partition table based on /'dynparts' and BBT (it is better to set the last partition size to SIZE_REMAINING) ebist - PHY loopback test echo - echo args to console editenv - edit environment variable edump - EMAC Register settings dump eloopback- Long loopback test env - environment handling commands epd - emac power down estart - EMAC start ewavetest- EMAC wave test exit - exit script false - do nothing, unsuccessfully fatfilesize- fatfilesize - load binary file from a dos filesystem fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) fatpartload- fatpartload - load binary file from a dos filesystem fatwrite- fatwrite - write binary file to a dos filesystem filelist- Dump the file list. filelisttest- This command is only for file list test filepartload- load part of a file to RAM force_overwrite- This serial apis are for force write and re-create partitions. This cmd is used to register which partition should force overwrite force_overwrite_init- This serial apis are for force write and re-create partitions. This cmd is used to register which partition should force overwrite get_mboot_config- get mboot config from binary coverted from mboot_config.ini get_mmap- get memory info from supernova's mmap gettime - gettime - Get the system executing time go - start application at address 'addr' gpio - GPIO Command: hdmi - hdmi - help - print command description/usage if_boot_to_pm- if boot to PM iminfo - print header information for application image imxtract- extract a part of a multi-image initDbgLevel- Initial varaible 'dbgLevel' init_raw_io- init raw_io module ir_delay- ir_delay - delay 300ms for IR detect. itest - return true/false on integer compare kernelProtect- kernelProtect - Protect kernel kernelProtectBist- kernelProtectBist - Protect kernel bist led - See led commands loadb - load binary file over serial line (kermit mode) loadenv - loadenv - load env for nand loads - load S-Record file over serial line loadspi - load data from SPI loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range m2e - Restore the address and len to env from supernova's mmap macaddr - setup EMAC MAC addr mbup - mboot upgrade md - memory display memtest - Get the performance of memory miuProtect- miuProtect - Protect miu mm - memory modify (auto-incrementing address) mscompress7- Compress or decompress lzma files msg - print string - msg [string] mstar - update kernal & root file system automatically by script file mtdparts- define flash/nand partitions mtest - simple RAM read/write test mversion- show changelist - mversion mw - memory write (fill) nand - NAND sub-system nandbin - nandbin usbport withsparedata?1:0 oobsize dumpC/T?1:0 bin_name partition_name - read out the contents of nand and store it to usb disk nandbin2- nandbin2 - read out ubi partition and environment parameter at once and store it to usb disk nandbinall- nandbinall usbport withsparedata?1:0 oobsize dumpC/T?1:0- read out the whole contents of nand and store it to usb disk nandclk - nandclk - tune nand clock nandinfo- nandinfo - show nand info nboot - nboot - boot from NAND device ncisbl - write cis, bootloader and uboot or only CIS for ROM boot ncishash- write cis and hash[0-2] for Secure ROM boot nm - memory modify (constant address) nsbootblk- Show how many block count sboot is nstar - nstar - update softwave system automatically via net nuttxProtect- nuttx Protect - Protect nuttx osd_create- osd_create - create osd layer osd_destroy- osd_destroy - destroy osd layer osd_flush- osd_flush - flush canvas to screen ostar - ostar - update softwave system automatically via oad ota_zip_check- do OTA zip package check. otp_enter- Enter OTP! otp_exit- Exit OTP! otp_lock- OTP LOCK! panel_init- panel_init - init panel by panel.ini panel_post_init- backligth on - backlight on panel_pre_init- panel_pre_init - init panel by panel.ini ping - send ICMP ECHO_REQUEST to network host pm51 - pm51 command: pm51 [option] pmProtect- runtime pm Protect - Protect runtime PM pop_raw_io_config- pop raw_io last config printenv- print environment variables push_raw_io_config- push raw_io current config raw_io_status- get raw_io status raw_read- Read the raw datas that store in the target device Yo have to execute 'config_raw_io' before using this cmd raw_write- Write the raw datas that store in the target deviceYo have to execute 'config_raw_io' before using this cmd recovery_wipe_partition- do recovery wipe data or cache. refreshcis- Rewrite cis for first factory boot rescue_printenv- print environment variables from rescue env rescue_saveenv- save environment variables to the rescue env part of persistent storage rescue_setenv- set environment variables to rescue env reset - Perform RESET of the CPU riu - riu - riu command rsv - rsv - Set reserved block as bad or good run - run commands in an environment variable runtime_pm- if boot to PM sar - sar Command: saveenv - save environment variables to persistent storage setenv - set environment variables setprogramok- Set nand program status OK showtb - Show register command table. - showtb [stage] showvar - print local hushshell variables sleep - delay execution for some time source - run script from memory spi2usb - Read data from spi to usb sync_mmap- Sync the some id's address and len to env and bootargs from supernova's mmap test - minimal test like /bin/sh testmode- set testmode into bootargs. tftpboot- boot image via network using TFTP protocol true - do nothing, successfully ubi - ubi commands ubi2nand- ubi2nand - read ubi partition file and restore it to nand ubibin - ubibin - read out ubi partition and store it to usb disk ubifsfilesize- get file size in UBIFS volume ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifspartload- load part of a file from an UBIFS filesystem ubifsumount- unmount UBIFS volume udstar - Execute the script file that is stored in usb disk updatemiureg- Call driver to update miu setting usb - USB sub-system usb2spi - write data from usb to spi usb_bin_check- do usb bin document check. usbboot - boot from USB device ustar - ustar - update kernal & root file system automatically by script file version - print monitor, compiler and linker version wdt_enable- wdt_enable n - set Watchdog timer to n secs