<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>USB Series Mini-B Surface Mounted</b>>NAME>VALUEMicro USB Package>NAME>VALUEUSB<b>Mini-USB "B" connector with 5th pin broken out.</b><p>
Created new symbol breaking out 5th "ID" pin in mini/micro USB connector spec. See: http://en.wikipedia.org/wiki/Mini_usb#Cables. Uses same footprint as 4-pin symbol.<p>
Also added pins to connect to mounting / shield pads if required (probably not generally needed as signals aren't shielded once they leave the connector).<b>LEDs</b><p>
<author>Created by librarian@cadsoft.de</author><br>
Extended by Federico Battaglin <author><federico.rd@fdpinternational.com></author> with DUOLED<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB R99A<br>
Source: http://www.osram.convergy.de/ ... lb_r99a.pdf>NAME>VALUE<b>CHICAGO MINIATURE LAMP, INC.</b><p>
7022X Series SMT LEDs 1206 Package Size>NAME>VALUE<B>LED</B><p>
5 mm, square, Siemens>NAME>VALUE<B>LED</B><p>
2 x 5 mm, rectangle>NAME>VALUE<B>LED</B><p>
3 mm, round>NAME>VALUE<B>LED</B><p>
5 mm, round>NAME>VALUE<B>LED</B><p>
1 mm, round, Siemens>NAME>VALUE<B>LED BLOCK</B><p>
1 LED, Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
SiemensA+K->NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE+-<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>LED</B><p>
rectangle, 5.7 x 3.2 mm>NAME>VALUE<B>IR LED</B><p>
IR transmitter Siemens>NAME>VALUE<b>TOPLED® High-optical Power LED (HOP)</b><p>
Source: http://www.osram.convergy.de/ ... ls_t675.pdf>NAME>VALUEAC<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LB M676.pdfAC>NAME>VALUE<b>Super SIDELED® High-Current LED</b><p>
LG A672, LP A672 <br>
Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)CA>NAME>VALUE<b>SmartLEDTM Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf>NAME>VALUE<b>Hyper TOPLED® RG Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf>NAME>VALUEAC<b>Hyper Micro SIDELED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf>NAME>VALUE<b>Power TOPLED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf>NAME>VALUECACC<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB Q993<br>
Source: http://www.osram.convergy.de/ ... Lb_q993.pdf>NAME>VALUE<b>Mini TOPLED Santana®</b><p>
Source: http://www.osram.convergy.de/ ... LG M470.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_R971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf>NAME>VALUE<b>CHIPLED-0603</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE<b>SmartLED TTW</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE<b>Lumileds Lighting. LUXEON®</b> with cool pad<p>
Source: K2.pdf>NAME>VALUE<b>Lumileds Lighting. LUXEON®</b> without cool pad<p>
Source: K2.pdf>NAME>VALUE<B>LED</B><p>
10 mm, round>NAME>VALUE<b>SURFACE MOUNT LED LAMP</b> 3.5x2.8mm<p>
Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1)>NAME>VALUE<b>SML0805-2CW-TR (0805 PROFILE)</b> COOL WHITE<p>
Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdf>NAME>VALUE<b>SML10XXKH-TR (HIGH INTENSITY) LED</b><p>
<table>
<tr><td>SML10R3KH-TR</td><td>ULTRA RED</td></tr>
<tr><td>SML10E3KH-TR</td><td>SUPER REDSUPER BLUE</td></tr>
<tr><td>SML10O3KH-TR</td><td>SUPER ORANGE</td></tr>
<tr><td>SML10PY3KH-TR</td><td>PURE YELLOW</td></tr>
<tr><td>SML10OY3KH-TR</td><td>ULTRA YELLOW</td></tr>
<tr><td>SML10AG3KH-TR</td><td>AQUA GREEN</td></tr>
<tr><td>SML10BG3KH-TR</td><td>BLUE GREEN</td></tr>
<tr><td>SML10PB1KH-TR</td><td>SUPER BLUE</td></tr>
<tr><td>SML10CW1KH-TR</td><td>WHITE</td></tr>
</table>
Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDF>NAME>VALUE<b>SML0603-XXX (HIGH INTENSITY) LED</b><p>
<table>
<tr><td>AG3K</td><td>AQUA GREEN</td></tr>
<tr><td>B1K</td><td>SUPER BLUE</td></tr>
<tr><td>R1K</td><td>SUPER RED</td></tr>
<tr><td>R3K</td><td>ULTRA RED</td></tr>
<tr><td>O3K</td><td>SUPER ORANGE</td></tr>
<tr><td>O3KH</td><td>SOFT ORANGE</td></tr>
<tr><td>Y3KH</td><td>SUPER YELLOW</td></tr>
<tr><td>Y3K</td><td>SUPER YELLOW</td></tr>
<tr><td>2CW</td><td>WHITE</td></tr>
</table>
Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf>NAME>VALUEHyper CHIPLED Hyper-Bright LED
LB R99A
Source: http://www.osram.convergy.de/ ... lb_r99a.pdfCHICAGO MINIATURE LAMP, INC.
7022X Series SMT LEDs 1206 Package SizeLED
5 mm, square, SiemensLED
2 x 5 mm, rectangleLED
3 mm, roundLED
5 mm, roundLED
1 mm, round, SiemensLED BLOCK
1 LED, SiemensLED HOLDER
SiemensLED HOLDER
SiemensLED HOLDER
SiemensLED HOLDER
SiemensIR LED
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking
InifineonIR LED
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking
InifineonLED
rectangle, 5.7 x 3.2 mmIR LED
IR transmitter SiemensTOPLED® High-optical Power LED (HOP)
Source: http://www.osram.convergy.de/ ... ls_t675.pdfBLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED
Source: http://www.osram.convergy.de/ ... LB M676.pdfSuper SIDELED® High-Current LED
LG A672, LP A672
Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)SmartLEDTM Hyper-Bright LED
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdfHyper TOPLED® RG Hyper-Bright LED
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdfHyper Micro SIDELED®
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdfPower TOPLED®
Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdfHyper CHIPLED Hyper-Bright LED
LB Q993
Source: http://www.osram.convergy.de/ ... Lb_q993.pdfMini TOPLED Santana®
Source: http://www.osram.convergy.de/ ... LG M470.pdfCHIPLED
Source: http://www.osram.convergy.de/ ... LG_R971.pdfCHIPLED
Source: http://www.osram.convergy.de/ ... LG_LY N971.pdfCHIPLED
Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdfCHIPLED-0603
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603
Package able to withstand TTW-soldering heat
Package suitable for TTW-soldering
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdfSmartLED TTW
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603
Package able to withstand TTW-soldering heat
Package suitable for TTW-soldering
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdfLumileds Lighting. LUXEON® with cool pad
Source: K2.pdfLumileds Lighting. LUXEON® without cool pad
Source: K2.pdfLED
10 mm, roundSURFACE MOUNT LED LAMP 3.5x2.8mm
Source: http://www.kingbright.com/manager/upload/pdf/KA-3528ASYC(Ver1189474662.1)SML0805-2CW-TR (0805 PROFILE) COOL WHITE
Source: http://www.ledtronics.com/ds/smd-0603/Dstr0093.pdfSML10XXKH-TR (HIGH INTENSITY) LED
SML10R3KH-TRULTRA RED
SML10E3KH-TRSUPER REDSUPER BLUE
SML10O3KH-TRSUPER ORANGE
SML10PY3KH-TRPURE YELLOW
SML10OY3KH-TRULTRA YELLOW
SML10AG3KH-TRAQUA GREEN
SML10BG3KH-TRBLUE GREEN
SML10PB1KH-TRSUPER BLUE
SML10CW1KH-TRWHITE
Source: http://www.ledtronics.com/ds/smd-1206/dstr0094.PDFSML0603-XXX (HIGH INTENSITY) LED
AG3KAQUA GREEN
B1KSUPER BLUE
R1KSUPER RED
R3KULTRA RED
O3KSUPER ORANGE
O3KHSOFT ORANGE
Y3KHSUPER YELLOW
Y3KSUPER YELLOW
2CWWHITE
Source: http://www.ledtronics.com/ds/smd-0603/Dstr0092.pdf>NAME>VALUE<b>LED</b><p>
<u>OSRAM</u>:<br>
- <u>CHIPLED</u><br>
LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
LH N974, LH R974<br>
LS Q976, LO Q976, LY Q976<br>
LO Q996<br>
- <u>Hyper CHIPLED</u><br>
LW Q18S<br>
LB Q993, LB Q99A, LB R99A<br>
- <u>SideLED</u><br>
LS A670, LO A670, LY A670, LG A670, LP A670<br>
LB A673, LV A673, LT A673, LW A673<br>
LH A674<br>
LY A675<br>
LS A676, LA A676, LO A676, LY A676, LW A676<br>
LS A679, LY A679, LG A679<br>
- <u>Hyper Micro SIDELED®</u><br>
LS Y876, LA Y876, LO Y876, LY Y876<br>
LT Y87S<br>
- <u>SmartLED</u><br>
LW L88C, LW L88S<br>
LB L89C, LB L89S, LG L890<br>
LS L89K, LO L89K, LY L89K<br>
LS L896, LA L896, LO L896, LY L896<br>
- <u>TOPLED</u><br>
LS T670, LO T670, LY T670, LG T670, LP T670<br>
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br>
LG T671, LOG T671, LSG T671<br>
LB T673, LV T673, LT T673, LW T673<br>
LH T674<br>
LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br>
LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br>
LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br>
LW T67C<br>
LS T679, LY T679, LG T679<br>
LS T770, LO T770, LY T770, LG T770, LP T770<br>
LB T773, LV T773, LT T773, LW T773<br>
LH T774<br>
LS E675, LA E675, LY E675, LS T675<br>
LS T776, LA T776, LO T776, LY T776, LB T776<br>
LHGB T686<br>
LT T68C, LB T68C<br>
- <u>Hyper Mini TOPLED®</u><br>
LB M676<br>
- <u>Mini TOPLED Santana®</u><br>
LG M470<br>
LS M47K, LO M47K, LY M47K
<p>
Source: http://www.osram.convergy.de<p>
<u>LUXEON:</u><br>
- <u>LUMILED®</u><br>
LXK2-PW12-R00, LXK2-PW12-S00, LXK2-PW14-U00, LXK2-PW14-V00<br>
LXK2-PM12-R00, LXK2-PM12-S00, LXK2-PM14-U00<br>
LXK2-PE12-Q00, LXK2-PE12-R00, LXK2-PE12-S00, LXK2-PE14-T00, LXK2-PE14-U00<br>
LXK2-PB12-K00, LXK2-PB12-L00, LXK2-PB12-M00, LXK2-PB14-N00, LXK2-PB14-P00, LXK2-PB14-Q00<br>
LXK2-PR12-L00, LXK2-PR12-M00, LXK2-PR14-Q00, LXK2-PR14-R00<br>
LXK2-PD12-Q00, LXK2-PD12-R00, LXK2-PD12-S00<br>
LXK2-PH12-R00, LXK2-PH12-S00<br>
LXK2-PL12-P00, LXK2-PL12-Q00, LXK2-PL12-R00
<p>
Source: www.luxeon.com<p>
<u>KINGBRIGHT:</U><p>
KA-3528ASYC<br>
Source: www.kingbright.com<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE<b>RESISTOR</b><p>
chip>NAME>VALUE>NAME>VALUE>NAME>VALUE1/6W Thru-hole Resistor - *UNPROVEN*>NAME>VALUE>NAME>VALUE1/4W Resistor, 0.4" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value1/2W Resistor, 0.5" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value1W Resistor, 0.6" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value2W Resistor, 0.8" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value<h3>AXIAL-0.3-KIT</h3>
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br>
<br>
<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>ValueThis is the "EZ" version of the standard .3" spaced resistor package.<br>
It has a reduced top mask to make it harder to install upside-down.>Name>Value>Name>Value>NAME>VALUE>NAME>VALUE<b>Resistor</b>
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Name>Value>NAME>VALUE>Name>Value>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE>Name>Value>Name>Value>NAME>VALUE>NAME>VALUECTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.This is the "EZ" version of the .1" spaced ceramic thru-hole cap.<br>
It has reduced top mask to make it harder to put the component on the wrong side of the board.>Name>Value>Name>Value>NAME>VALUE<b>Capacitor</b>
Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2>
<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p>
<h3>Obligatory Warning</h3>
<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p>
<h3>License</h3>
<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p>
<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
</p><b>SOT23</b> - Reflow soldering>NAME>VALUE>NAME>VALUE<b>SMALL OUTLINE TRANSISTOR</b><p>
TS-003>NAME>VALUE>VALUE>NAMEDSG<b>P-Channel Mosfet</b>
<p><b>LEGEND</b></p>
<p>
<b>VDS</b>: Voltage Drain-Source<br/>
<b>ID</b>: Drain Current<br/>
<b>RDS(ON)</b>: Drain-Source On-State Resistance<br/>
<b>VGS(TH)</b>: Gate-Source Threshold Voltage<br/>
<b>CISS</b>: Drain-Source Input Capacitance
</p>
<p>
<b>SOT-23</b>
<table border="0" width="90%" cellspacing="0" cellpadding="5">
<tr bgcolor="#DDDDDD">
<td>Name</td>
<td>VDS</td>
<td>ID</td>
<td>RDS(ON)</td>
<td>VGS(TH)</td>
<td>CISS</td>
<td>Order Number</td>
</tr>
<tr>
<td>IRLML5103</td>
<td>30V</td>
<td>760mA</td>
<td>600 mOhm</td>
<td>--</td>
<td>75pF @ 25V</td>
<td>Digikey: IRLML5103PBFCT-ND</td>
</tr>
<tr>
<td>IRLML6401</td>
<td>12V</td>
<td>4.3A</td>
<td>50 mOhm</td>
<td>950mV @ 250µA</td>
<td>830pF @ 10V</td>
<td>Digikey: IRLML6401PBFTR-ND</td>
</tr>
<tr>
<td>NTR0202PL</td>
<td>20V</td>
<td>400mA</td>
<td>800 mOhm</td>
<td>2.3V @ 250uA</td>
<td>70pF @ 5V</td>
<td>Digikey: NTR0202PLT1GOSTR-ND</td>
</tr>
<tr>
<td>NTR4101PT1G</td>
<td>20V</td>
<td>1.8A</td>
<td>85 mOhm</td>
<td>1.2V @ 250uA</td>
<td>675pF @ 10V</td>
<td>Digikey: NTR4101PT1GOSCT-ND</td>
</tr>
<tr>
<td>DMP2004K</td>
<td>20V</td>
<td>600mA</td>
<td>900 mOhm</td>
<td>1V @ 250uA</td>
<td>175pF @ 16V</td>
<td>Digikey: DMP2004KDICT-ND</td>
</tr>
<tr>
<td>PMV65XP</td>
<td>20V</td>
<td>3.9A</td>
<td>76 mOhm</td>
<td>950mV @ 1mA</td>
<td>725pF @ 20V</td>
<td>Digikey: 568-2358-2-ND</td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
</table>
<b>TO-252</b>
<table border="0" width="90%" cellspacing="0" cellpadding="5">
<tr bgcolor="#DDDDDD">
<td>Name</td>
<td>VDS</td>
<td>ID</td>
<td>RDS(ON)</td>
<td>VGS(TH)</td>
<td>CISS</td>
<td>Order Number</td>
</tr>
<tr>
<td>AOD417</td>
<td>30V</td>
<td>25A</td>
<td>34 mOhm</td>
<td>3V @ 250µA</td>
<td>920pF @ 15V</td>
<td>Digikey: 785-1106-2-ND</td>
</tr>
</table>
</p><b>Frames for Sheet and Layout</b>Date:>LAST_DATE_TIMESheet:>SHEETREV:TITLE:Document Number:>DRAWING_NAME<b>FRAME</b><p>
LETTER landscape<b>FTDI (TM) CHIP</b> Future Technology Devices International Ltd.<p>
http://www.ftdichip.com<b>QFN 32</b><p>
Source: http://www.ftdichip.com/Documents/DataSheets/DS_FT232R_v104.pdf>VALUE>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find drivers, regulators, and amplifiers.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>Small Outline Transistor</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Voltage Regulator LDO</b>
Standard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap.<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>VALUE>NAME4UCON 15881<br>
Male .1" spaced SMT<br>
Keying posts into board>VALUE>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE1234562x3 .1" header.<br>
Shrouded, with keying- CONN-10681<br>
SMT- CONN-11415<br>
Pogo pins- HW-11044<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Name>Value>NAME>VALUE>Name>Value>Name>Value<b>CAPACITOR</b><p>
chip>NAME>VALUE>NAME>VALUE1007 (2518 metric) package>NAME>VALUE>Name>Value>NAME>VALUE>NAME>VALUE1.3x1.3mm 1.7mm between. Fits Sumida CDRH2D09, CDRH2D18 inductor>NAME>VALUE>NAME>VALUE>Name>Value>Name>ValueFor Coiltronics/Cooper DR1030 series inductors>NAME>VALUE1W Resistor, 0.6" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value>Value>Name>NAME>VALUE>NAME>VALUE<b>Inductors</b><p>
Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers.<br>
SRN6045- 33uH, 20% 1.4A
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.