BOM for the LINEAR RAIL Version of the EnderXY Conversion

- Ender 3 V1/V2
- Printed parts from the step file 

- Extrusions (don't have to be vroller compatible. The only two vroller extrusions are for the bed and are reused.)
2x 40x20 430mm (back)
2x 20x20 400mm (top side)
3x 20x20 370mm (top front/back, carriage)

- Belt
8x GT2 Idler
5m GT2 Belt

- other Motion
3x MGN12H 350mm (don't buy the cheapest. You will safe money. Trust me.)
2x 350mm T8 Leadscrew
2x vslot slider for 20x20 (Roller Block: easily diy'able. It is just a expensive plate with holes. You will have enough wheels and spacers.)

- Hardware 
M3, M4, M5 screws
Hammernuts for 20x20 Extrusion

if you want to sturdy up your top frame:
6x T-Slot corner bracket

if you want to use the Hotend assembly from the stepfile: (not finished, need some work after printing)
2x computer motherboard standoffs to mount the fanshroud 

- A lot of patience and finesse.