const int PIRPin = 2; 
const int LED1= 9; // pin para el LED
const int LED2 = 8;   


void setup() {
pinMode(LED1, OUTPUT);
pinMode(LED2, OUTPUT);
pinMode(A3, OUTPUT);// Set A5 as OUTPUT
}

void loop() {
  digitalWrite(A3, HIGH);   // atomize
  digitalWrite(LED1, HIGH);   // turn the LED on (HIGH is the voltage level)
  digitalWrite(LED2, HIGH);   // turn the LED on (HIGH is the voltage level)       
  
  delay(10000);              // wait for 10 seconds
//digitalWrite(A3, LOW);    // atomization stopped
//delay(1000); 
  
}