(kicad_pcb
	(version 20241229)
	(generator "pcbnew")
	(generator_version "9.0")
	(general
		(thickness 1.6)
		(legacy_teardrops no)
	)
	(paper "A4")
	(layers
		(0 "F.Cu" signal)
		(2 "B.Cu" signal)
		(9 "F.Adhes" user "F.Adhesive")
		(11 "B.Adhes" user "B.Adhesive")
		(13 "F.Paste" user)
		(15 "B.Paste" user)
		(5 "F.SilkS" user "F.Silkscreen")
		(7 "B.SilkS" user "B.Silkscreen")
		(1 "F.Mask" user)
		(3 "B.Mask" user)
		(17 "Dwgs.User" user "User.Drawings")
		(19 "Cmts.User" user "User.Comments")
		(21 "Eco1.User" user "User.Eco1")
		(23 "Eco2.User" user "User.Eco2")
		(25 "Edge.Cuts" user)
		(27 "Margin" user)
		(31 "F.CrtYd" user "F.Courtyard")
		(29 "B.CrtYd" user "B.Courtyard")
		(35 "F.Fab" user)
		(33 "B.Fab" user)
		(39 "User.1" user)
		(41 "User.2" user)
		(43 "User.3" user)
		(45 "User.4" user)
	)
	(setup
		(pad_to_mask_clearance 0)
		(allow_soldermask_bridges_in_footprints no)
		(tenting front back)
		(pcbplotparams
			(layerselection 0x00000000_00000000_55555555_5755f5ff)
			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
			(disableapertmacros no)
			(usegerberextensions no)
			(usegerberattributes yes)
			(usegerberadvancedattributes yes)
			(creategerberjobfile yes)
			(dashed_line_dash_ratio 12.000000)
			(dashed_line_gap_ratio 3.000000)
			(svgprecision 4)
			(plotframeref no)
			(mode 1)
			(useauxorigin no)
			(hpglpennumber 1)
			(hpglpenspeed 20)
			(hpglpendiameter 15.000000)
			(pdf_front_fp_property_popups yes)
			(pdf_back_fp_property_popups yes)
			(pdf_metadata yes)
			(pdf_single_document no)
			(dxfpolygonmode yes)
			(dxfimperialunits yes)
			(dxfusepcbnewfont yes)
			(psnegative no)
			(psa4output no)
			(plot_black_and_white yes)
			(sketchpadsonfab no)
			(plotpadnumbers no)
			(hidednponfab no)
			(sketchdnponfab yes)
			(crossoutdnponfab yes)
			(subtractmaskfromsilk no)
			(outputformat 1)
			(mirror no)
			(drillshape 1)
			(scaleselection 1)
			(outputdirectory "")
		)
	)
	(net 0 "")
	(net 1 "Net-(BZ1--)")
	(net 2 "+5V")
	(net 3 "+3.3V")
	(net 4 "Earth")
	(net 5 "Net-(DD3-XOUT)")
	(net 6 "Net-(DD3-XIN)")
	(net 7 "+1.1V")
	(net 8 "ENC_A")
	(net 9 "ENC_B")
	(net 10 "ENC_BTN")
	(net 11 "Net-(DD1-~{CS})")
	(net 12 "Net-(DD1-IO2)")
	(net 13 "Net-(DD1-IO3)")
	(net 14 "Net-(DD1-CLK)")
	(net 15 "Net-(DD1-DO(IO1))")
	(net 16 "unconnected-(DD1-EP-Pad9)")
	(net 17 "Net-(DD1-DI(IO0))")
	(net 18 "Net-(DD2-LX1)")
	(net 19 "Net-(DD2-EN)")
	(net 20 "Net-(DD2-LX2)")
	(net 21 "Net-(DD2-PS)")
	(net 22 "unconnected-(DD3-GPIO13-Pad16)")
	(net 23 "BTN8")
	(net 24 "BTN5")
	(net 25 "USB-_")
	(net 26 "BUZZER")
	(net 27 "WS2812_1")
	(net 28 "BTN2")
	(net 29 "unconnected-(DD3-GPIO28_ADC2-Pad40)")
	(net 30 "ENC_C")
	(net 31 "SCLK")
	(net 32 "USB+_")
	(net 33 "unconnected-(DD3-SWCLK-Pad24)")
	(net 34 "unconnected-(DD3-GPIO14-Pad17)")
	(net 35 "RS")
	(net 36 "unconnected-(DD3-GPIO29_ADC3-Pad41)")
	(net 37 "unconnected-(DD3-GPIO3-Pad5)")
	(net 38 "WS2812_2")
	(net 39 "RES")
	(net 40 "BTN7")
	(net 41 "BTN1")
	(net 42 "!SS")
	(net 43 "BTN6")
	(net 44 "MOSI")
	(net 45 "unconnected-(DD3-GPIO15-Pad18)")
	(net 46 "unconnected-(DD3-SWD-Pad25)")
	(net 47 "BTN4")
	(net 48 "BTN3")
	(net 49 "Net-(DD3-RUN)")
	(net 50 "Net-(HG1-LEDA)")
	(net 51 "unconnected-(HG1-TP0-Pad1)")
	(net 52 "unconnected-(HG1-TP1-Pad2)")
	(net 53 "unconnected-(HG1-NC-Pad9)")
	(net 54 "unconnected-(J1-SBU1-PadA8)")
	(net 55 "USB-")
	(net 56 "unconnected-(J1-SBU2-PadB8)")
	(net 57 "Net-(J1-CC2)")
	(net 58 "USB+")
	(net 59 "Net-(J1-CC1)")
	(net 60 "Net-(LED1-DO)")
	(net 61 "Net-(LED2-DO)")
	(net 62 "Net-(LED19-DO)")
	(net 63 "Net-(LED3-DO)")
	(net 64 "Net-(LED25-DO)")
	(net 65 "Net-(LED10-DI)")
	(net 66 "Net-(LED26-DO)")
	(net 67 "Net-(LED11-DI)")
	(net 68 "Net-(LED12-DI)")
	(net 69 "Net-(LED27-DO)")
	(net 70 "Net-(LED13-DI)")
	(net 71 "Net-(LED14-DI)")
	(net 72 "Net-(LED15-DI)")
	(net 73 "Net-(LED10-DO)")
	(net 74 "Net-(LED11-DO)")
	(net 75 "Net-(LED12-DO)")
	(net 76 "Net-(LED13-DO)")
	(net 77 "Net-(LED14-DO)")
	(net 78 "Net-(LED15-DO)")
	(net 79 "Net-(LED16-DO)")
	(net 80 "Net-(LED17-DO)")
	(net 81 "Net-(LED18-DO)")
	(net 82 "unconnected-(LED20-DO-Pad1)")
	(net 83 "Net-(LED21-DO)")
	(net 84 "Net-(LED22-DO)")
	(net 85 "Net-(LED23-DO)")
	(net 86 "Net-(LED24-DO)")
	(net 87 "unconnected-(LED28-DO-Pad1)")
	(net 88 "WS1")
	(net 89 "CLK1")
	(net 90 "DAT1")
	(net 91 "Net-(Q1-B)")
	(net 92 "Net-(R5-Pad1)")
	(net 93 "Net-(R10-Pad1)")
	(net 94 "Net-(R11-Pad1)")
	(net 95 "Net-(R14-Pad2)")
	(net 96 "unconnected-(DD3-GPIO12-Pad15)")
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 172.89 112.3 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R24"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 23 "BTN8")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 123.8 116.8 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C10"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 134.49 112.3 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R22"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 40 "BTN7")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 115 119.22 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C14"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 134.51 73.8 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R17"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 41 "BTN1")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 123.42 112.1)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C11"
			(at 0 -1.05 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 0)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 119.8 120.7 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C8"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 169.86 81.55)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW5"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 24 "BTN5")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 134.01 93 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R19"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 28 "BTN2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm"
		(layer "F.Cu")
		(at 116.7 123 180)
		(descr "SMD3225/4, Crystal, 3.2x2.5mm package, SMD, generated with kicad-footprint-generator make_crystal.py, http://www.txccrystal.com/images/pdf/7m-accuracy.pdf")
		(property "Reference" "Y1"
			(at 0 -2.45 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "ABM8-272-T3"
			(at 0 2.45 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Four pin crystal, GND on pins 2 and 4"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "Crystal*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -1.1 0.85 180)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
			(net 5 "Net-(DD3-XOUT)")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 1.1 0.85 180)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
			(net 4 "Earth")
			(pinfunction "2")
			(pintype "passive")
		)
		(pad "3" smd roundrect
			(at 1.1 -0.85 180)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
			(net 6 "Net-(DD3-XIN)")
			(pinfunction "3")
			(pintype "passive")
		)
		(pad "4" smd roundrect
			(at -1.1 -0.85 180)
			(size 1.4 1.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.208333)
			(net 4 "Earth")
			(pinfunction "4")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Crystal.3dshapes/Crystal_SMD_3225-4Pin_3.2x2.5mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 166.75 128.25 90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED5"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 67 "Net-(LED11-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 66 "Net-(LED26-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 121.7 110.4 90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C6"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 90)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 90)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 90)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 90)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 150.66 120.03)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW10"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 47 "BTN4")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 150.65 125.5 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED14"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 77 "Net-(LED14-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 71 "Net-(LED14-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "W25Q16JVUXIQ:W25Q16JVUXIQ"
		(layer "F.Cu")
		(at 117 109.1125)
		(descr "USON 2x3x0.6-mm")
		(tags "Integrated Circuit")
		(property "Reference" "DD1"
			(at 0.53 -1.93 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "W25Q16JVUXIQ_TR"
			(at 0 0 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://componentsearchengine.com/Datasheets/1/W25Q16JVUXIQ TR.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "NOR Flash spiFlash, 3V, 16M-bit, 4Kb Uniform Sector, DTR"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.6"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "Winbond"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "W25Q16JVUXIQ TR"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" "454-W25Q16JVUXIQTR"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Winbond/W25Q16JVUXIQ-TR?qs=qSfuJ%252Bfl%2Fd7SDdIHLGOd1g%3D%3D"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" "W25Q16JVUXIQ TR"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" "https://www.arrow.com/en/products/w25q16jvuxiqtr/winbond-electronics?utm_currency=USD&region=nac"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -1.4 -0.75 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 11 "Net-(DD1-~{CS})")
			(pinfunction "~{CS}")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at -1.4 -0.25 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 15 "Net-(DD1-DO(IO1))")
			(pinfunction "DO(IO1)")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -1.4 0.25 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 12 "Net-(DD1-IO2)")
			(pinfunction "IO2")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at -1.4 0.75 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "5" smd rect
			(at 1.4 0.75 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 17 "Net-(DD1-DI(IO0))")
			(pinfunction "DI(IO0)")
			(pintype "passive")
		)
		(pad "6" smd rect
			(at 1.4 0.25 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 14 "Net-(DD1-CLK)")
			(pinfunction "CLK")
			(pintype "passive")
		)
		(pad "7" smd rect
			(at 1.4 -0.25 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 13 "Net-(DD1-IO3)")
			(pinfunction "IO3")
			(pintype "passive")
		)
		(pad "8" smd rect
			(at 1.4 -0.75 90)
			(size 0.3 0.9)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 3 "+3.3V")
			(pinfunction "VCC")
			(pintype "passive")
		)
		(pad "9" smd rect
			(at 0 0)
			(size 0.25 1.65)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 16 "unconnected-(DD1-EP-Pad9)")
			(pinfunction "EP")
			(pintype "passive+no_connect")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/library/W25Q16JVUXIQ_TR.stp"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 153.7 93 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R20"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 43 "BTN6")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 131.47 81.55)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW4"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 41 "BTN1")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 150.65 106.3 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED19"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 62 "Net-(LED19-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 76 "Net-(LED13-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 178 127.95)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C46"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 172.91 93 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R21"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 48 "BTN3")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 109.25 103.35 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C48"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 165.725 72.725 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C49"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 113.72 112.8 180)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C13"
			(at 0 -1.05 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 0)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 180)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 180)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 180)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 180)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 164.25 72.75 -90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED21"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 83 "Net-(LED21-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 78 "Net-(LED15-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 114.2 123 90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C5"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "15pF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 90)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 90)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 90)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 6 "Net-(DD3-XIN)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 90)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 169.9 106.3 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED13"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 76 "Net-(LED13-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 70 "Net-(LED13-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 131.46 120.03)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW9"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 40 "BTN7")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 131.5 125.5 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED8"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 71 "Net-(LED14-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 61 "Net-(LED2-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 125 72.75 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C37"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 178 83.638076 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED4"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 65 "Net-(LED10-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 64 "Net-(LED25-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0201_0603Metric"
		(layer "F.Cu")
		(at 120.65 109.3425 -90)
		(descr "Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R2"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "27R"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 55 "USB-")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 25 "USB-_")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 118.55 128.25 90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED27"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 69 "Net-(LED27-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 85 "Net-(LED23-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 131.5 106.3 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED2"
			(at -0.375 -1.875 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 61 "Net-(LED2-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 62 "Net-(LED19-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 109.25 104.85)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED24"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 86 "Net-(LED24-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 81 "Net-(LED18-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 178 85.138076)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C32"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 150.65 108.5)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C26"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 109.25 113.25 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C34"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 177.98 117.265769)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C38"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 131.46 100.78)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW6"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 28 "BTN2")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 151.75 72.75 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C45"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 169.9 127.75)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C30"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 155.55 128.25 90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED11"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 74 "Net-(LED11-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 67 "Net-(LED11-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 118.95 120.5 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C15"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 123.8 113.22 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C12"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 109.25 124.525)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED6"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 68 "Net-(LED12-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 69 "Net-(LED27-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 117.05 128.25 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C51"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 136.775 72.725 -90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED9"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 72 "Net-(LED15-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 63 "Net-(LED3-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 169.9 89.3)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C36"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 109.25 123.025 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C52"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 122.35 101.3 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED28"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 87 "unconnected-(LED28-DO-Pad1)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 86 "Net-(LED24-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 142.5 128.25 90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED17"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 80 "Net-(LED17-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 74 "Net-(LED11-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 172.91 73.8 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R18"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 24 "BTN5")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 141.025 128.225 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C33"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm"
		(layer "F.Cu")
		(at 118.7 115.4)
		(descr "QFN, 56 Pin (https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=634), generated with kicad-footprint-generator ipc_noLead_generator.py")
		(tags "QFN NoLead")
		(property "Reference" "DD3"
			(at 0 -4.83 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "RP2040"
			(at 0 4.83 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "A microcontroller by Raspberry Pi"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "QFN*1EP*7x7mm?P0.4mm*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.8 -0.8)
			(size 1.29 1.29)
			(layers "F.Paste")
			(roundrect_rratio 0.193798)
		)
		(pad "" smd roundrect
			(at -0.8 0.8)
			(size 1.29 1.29)
			(layers "F.Paste")
			(roundrect_rratio 0.193798)
		)
		(pad "" smd roundrect
			(at 0.8 -0.8)
			(size 1.29 1.29)
			(layers "F.Paste")
			(roundrect_rratio 0.193798)
		)
		(pad "" smd roundrect
			(at 0.8 0.8)
			(size 1.29 1.29)
			(layers "F.Paste")
			(roundrect_rratio 0.193798)
		)
		(pad "1" smd roundrect
			(at -3.4375 -2.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "power_in")
		)
		(pad "2" smd roundrect
			(at -3.4375 -2.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 89 "CLK1")
			(pinfunction "GPIO0")
			(pintype "bidirectional")
		)
		(pad "3" smd roundrect
			(at -3.4375 -1.8)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 90 "DAT1")
			(pinfunction "GPIO1")
			(pintype "bidirectional")
		)
		(pad "4" smd roundrect
			(at -3.4375 -1.4)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 88 "WS1")
			(pinfunction "GPIO2")
			(pintype "bidirectional")
		)
		(pad "5" smd roundrect
			(at -3.4375 -1)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 37 "unconnected-(DD3-GPIO3-Pad5)")
			(pinfunction "GPIO3")
			(pintype "bidirectional+no_connect")
		)
		(pad "6" smd roundrect
			(at -3.4375 -0.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 41 "BTN1")
			(pinfunction "GPIO4")
			(pintype "bidirectional")
		)
		(pad "7" smd roundrect
			(at -3.4375 -0.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 28 "BTN2")
			(pinfunction "GPIO5")
			(pintype "bidirectional")
		)
		(pad "8" smd roundrect
			(at -3.4375 0.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 48 "BTN3")
			(pinfunction "GPIO6")
			(pintype "bidirectional")
		)
		(pad "9" smd roundrect
			(at -3.4375 0.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 47 "BTN4")
			(pinfunction "GPIO7")
			(pintype "bidirectional")
		)
		(pad "10" smd roundrect
			(at -3.4375 1)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "passive")
		)
		(pad "11" smd roundrect
			(at -3.4375 1.4)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 24 "BTN5")
			(pinfunction "GPIO8")
			(pintype "bidirectional")
		)
		(pad "12" smd roundrect
			(at -3.4375 1.8)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 43 "BTN6")
			(pinfunction "GPIO9")
			(pintype "bidirectional")
		)
		(pad "13" smd roundrect
			(at -3.4375 2.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 40 "BTN7")
			(pinfunction "GPIO10")
			(pintype "bidirectional")
		)
		(pad "14" smd roundrect
			(at -3.4375 2.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 23 "BTN8")
			(pinfunction "GPIO11")
			(pintype "bidirectional")
		)
		(pad "15" smd roundrect
			(at -2.6 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 96 "unconnected-(DD3-GPIO12-Pad15)")
			(pinfunction "GPIO12")
			(pintype "bidirectional+no_connect")
		)
		(pad "16" smd roundrect
			(at -2.2 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 22 "unconnected-(DD3-GPIO13-Pad16)")
			(pinfunction "GPIO13")
			(pintype "bidirectional+no_connect")
		)
		(pad "17" smd roundrect
			(at -1.8 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 34 "unconnected-(DD3-GPIO14-Pad17)")
			(pinfunction "GPIO14")
			(pintype "bidirectional+no_connect")
		)
		(pad "18" smd roundrect
			(at -1.4 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 45 "unconnected-(DD3-GPIO15-Pad18)")
			(pinfunction "GPIO15")
			(pintype "bidirectional+no_connect")
		)
		(pad "19" smd roundrect
			(at -1 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "TESTEN")
			(pintype "input")
		)
		(pad "20" smd roundrect
			(at -0.6 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 6 "Net-(DD3-XIN)")
			(pinfunction "XIN")
			(pintype "input")
		)
		(pad "21" smd roundrect
			(at -0.2 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 5 "Net-(DD3-XOUT)")
			(pinfunction "XOUT")
			(pintype "passive")
		)
		(pad "22" smd roundrect
			(at 0.2 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "passive")
		)
		(pad "23" smd roundrect
			(at 0.6 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pinfunction "DVDD")
			(pintype "power_in")
		)
		(pad "24" smd roundrect
			(at 1 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 33 "unconnected-(DD3-SWCLK-Pad24)")
			(pinfunction "SWCLK")
			(pintype "input+no_connect")
		)
		(pad "25" smd roundrect
			(at 1.4 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 46 "unconnected-(DD3-SWD-Pad25)")
			(pinfunction "SWD")
			(pintype "bidirectional+no_connect")
		)
		(pad "26" smd roundrect
			(at 1.8 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 49 "Net-(DD3-RUN)")
			(pinfunction "RUN")
			(pintype "input")
		)
		(pad "27" smd roundrect
			(at 2.2 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 39 "RES")
			(pinfunction "GPIO16")
			(pintype "bidirectional")
		)
		(pad "28" smd roundrect
			(at 2.6 3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 35 "RS")
			(pinfunction "GPIO17")
			(pintype "bidirectional")
		)
		(pad "29" smd roundrect
			(at 3.4375 2.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 10 "ENC_BTN")
			(pinfunction "GPIO18")
			(pintype "bidirectional")
		)
		(pad "30" smd roundrect
			(at 3.4375 2.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 8 "ENC_A")
			(pinfunction "GPIO19")
			(pintype "bidirectional")
		)
		(pad "31" smd roundrect
			(at 3.4375 1.8)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 30 "ENC_C")
			(pinfunction "GPIO20")
			(pintype "bidirectional")
		)
		(pad "32" smd roundrect
			(at 3.4375 1.4)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 9 "ENC_B")
			(pinfunction "GPIO21")
			(pintype "bidirectional")
		)
		(pad "33" smd roundrect
			(at 3.4375 1)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "passive")
		)
		(pad "34" smd roundrect
			(at 3.4375 0.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 26 "BUZZER")
			(pinfunction "GPIO22")
			(pintype "bidirectional")
		)
		(pad "35" smd roundrect
			(at 3.4375 0.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 38 "WS2812_2")
			(pinfunction "GPIO23")
			(pintype "bidirectional")
		)
		(pad "36" smd roundrect
			(at 3.4375 -0.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 27 "WS2812_1")
			(pinfunction "GPIO24")
			(pintype "bidirectional")
		)
		(pad "37" smd roundrect
			(at 3.4375 -0.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 42 "!SS")
			(pinfunction "GPIO25")
			(pintype "bidirectional")
		)
		(pad "38" smd roundrect
			(at 3.4375 -1)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 31 "SCLK")
			(pinfunction "GPIO26_ADC0")
			(pintype "bidirectional")
		)
		(pad "39" smd roundrect
			(at 3.4375 -1.4)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 44 "MOSI")
			(pinfunction "GPIO27_ADC1")
			(pintype "bidirectional")
		)
		(pad "40" smd roundrect
			(at 3.4375 -1.8)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 29 "unconnected-(DD3-GPIO28_ADC2-Pad40)")
			(pinfunction "GPIO28_ADC2")
			(pintype "bidirectional+no_connect")
		)
		(pad "41" smd roundrect
			(at 3.4375 -2.2)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 36 "unconnected-(DD3-GPIO29_ADC3-Pad41)")
			(pinfunction "GPIO29_ADC3")
			(pintype "bidirectional+no_connect")
		)
		(pad "42" smd roundrect
			(at 3.4375 -2.6)
			(size 0.875 0.2)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "passive")
		)
		(pad "43" smd roundrect
			(at 2.6 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "ADC_AVDD")
			(pintype "power_in")
		)
		(pad "44" smd roundrect
			(at 2.2 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "VREG_IN")
			(pintype "power_in")
		)
		(pad "45" smd roundrect
			(at 1.8 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pinfunction "VREG_VOUT")
			(pintype "power_out")
		)
		(pad "46" smd roundrect
			(at 1.4 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 25 "USB-_")
			(pinfunction "USB_DM")
			(pintype "bidirectional")
		)
		(pad "47" smd roundrect
			(at 1 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 32 "USB+_")
			(pinfunction "USB_DP")
			(pintype "bidirectional")
		)
		(pad "48" smd roundrect
			(at 0.6 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "USB_VDD")
			(pintype "power_in")
		)
		(pad "49" smd roundrect
			(at 0.2 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pinfunction "IOVDD")
			(pintype "passive")
		)
		(pad "50" smd roundrect
			(at -0.2 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pinfunction "DVDD")
			(pintype "passive")
		)
		(pad "51" smd roundrect
			(at -0.6 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 13 "Net-(DD1-IO3)")
			(pinfunction "QSPI_SD3")
			(pintype "bidirectional")
		)
		(pad "52" smd roundrect
			(at -1 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 14 "Net-(DD1-CLK)")
			(pinfunction "QSPI_SCLK")
			(pintype "output")
		)
		(pad "53" smd roundrect
			(at -1.4 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 17 "Net-(DD1-DI(IO0))")
			(pinfunction "QSPI_SD0")
			(pintype "bidirectional")
		)
		(pad "54" smd roundrect
			(at -1.8 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 12 "Net-(DD1-IO2)")
			(pinfunction "QSPI_SD2")
			(pintype "bidirectional")
		)
		(pad "55" smd roundrect
			(at -2.2 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 15 "Net-(DD1-DO(IO1))")
			(pinfunction "QSPI_SD1")
			(pintype "bidirectional")
		)
		(pad "56" smd roundrect
			(at -2.6 -3.4375)
			(size 0.2 0.875)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 11 "Net-(DD1-~{CS})")
			(pinfunction "QSPI_SS")
			(pintype "bidirectional")
		)
		(pad "57" smd rect
			(at 0 0)
			(size 3.2 3.2)
			(property pad_prop_heatsink)
			(layers "F.Cu" "F.Mask")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "power_in")
			(zone_connect 2)
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_DFN_QFN.3dshapes/QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 120.9625 123.05 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C44"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 129.55 128.25 90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED23"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 85 "Net-(LED23-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 180)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 80 "Net-(LED17-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 138.275 72.725 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C31"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 165.25 128.25 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C39"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 119.2 122.9 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C3"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "15pF"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 5 "Net-(DD3-XOUT)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 150.66 100.78)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW7"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 43 "BTN6")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 169.9 108.5)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C25"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 150.65 127.75)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C29"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 131.5 127.75)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C28"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "F.Cu")
		(at 153.6 112.3 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R23"
			(at 0 -1.17 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 1.17 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 47 "BTN4")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 120.9625 124.55)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED12"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 75 "Net-(LED12-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 68 "Net-(LED12-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 178.75 72.75 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C41"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm"
		(layer "F.Cu")
		(at 148.165 89.05 90)
		(descr "Alps rotary encoder, EC11E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html")
		(tags "rotary encoder")
		(property "Reference" "SW3"
			(at 2.8 -4.7 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "RotaryEncoder_Switch_MP"
			(at 7.5 10.4 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "RotaryEncoder*Switch*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 11.1 6.3 90)
			(layer "F.Fab")
		)
		(pad "A" thru_hole rect
			(at 0 0 90)
			(size 2 2)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 93 "Net-(R10-Pad1)")
			(pinfunction "A")
			(pintype "passive")
		)
		(pad "B" thru_hole circle
			(at 0 5 90)
			(size 2 2)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 94 "Net-(R11-Pad1)")
			(pinfunction "B")
			(pintype "passive")
		)
		(pad "C" thru_hole circle
			(at 0 2.5 90)
			(size 2 2)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 30 "ENC_C")
			(pinfunction "C")
			(pintype "passive")
		)
		(pad "MP" thru_hole rect
			(at 7.5 -3.1 90)
			(size 3.2 2)
			(drill oval 2.8 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "MP")
			(pintype "passive")
		)
		(pad "MP" thru_hole rect
			(at 7.5 8.1 90)
			(size 3.2 2)
			(drill oval 2.8 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "MP")
			(pintype "passive")
		)
		(pad "S1" thru_hole circle
			(at 14.5 5 90)
			(size 2 2)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 95 "Net-(R14-Pad2)")
			(pinfunction "S1")
			(pintype "passive")
		)
		(pad "S2" thru_hole circle
			(at 14.5 0 90)
			(size 2 2)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "S2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/EC11E15244G1.stp"
			(offset
				(xyz 7.5 -2.4 -11)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -0 -180 90)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 131.45 89.3)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C35"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 178 105.056538 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED16"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 79 "Net-(LED16-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 73 "Net-(LED10-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 154.05 128.25 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C47"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 178 95.847307)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C42"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 150.25 72.75 -90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED15"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 78 "Net-(LED15-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 72 "Net-(LED15-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 116.52 107.3 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C2"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 131.5 108.55)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C27"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 178 106.556538)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C50"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 177.25 72.75 -90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED25"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 64 "Net-(LED25-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 83 "Net-(LED21-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 122.35 102.8)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C40"
			(at 0 -1.16 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 178 126.475 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED26"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 66 "Net-(LED26-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 84 "Net-(LED22-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 118.22 107.3)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C1"
			(at 0 -1.05 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 0)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 169.9 125.5 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED20"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 82 "unconnected-(LED20-DO-Pad1)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 77 "Net-(LED14-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "F.Cu")
		(at 123.42 111.4)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C16"
			(at 0 -1.05 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.05 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 0)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 169.9 87 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED7"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 70 "Net-(LED13-DI)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 60 "Net-(LED1-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 178 115.765769 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED22"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 84 "Net-(LED22-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 79 "Net-(LED16-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 169.86 120.03)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW11"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 23 "BTN8")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 109.25 114.75)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED18"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 81 "Net-(LED18-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 90)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 75 "Net-(LED12-DO)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0201_0603Metric"
		(layer "F.Cu")
		(at 119.9 109.3425 -90)
		(descr "Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R1"
			(at 0 -1.05 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "27R"
			(at 0 1.05 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 -0.68 90)
			(layer "F.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "F.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 58 "USB+")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "F.Cu" "F.Mask")
			(roundrect_rratio 0.25)
			(net 32 "USB+_")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 178 94.347307 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED10"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 73 "Net-(LED10-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 65 "Net-(LED10-DI)")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB_1.00u"
		(layer "F.Cu")
		(at 169.86 100.78)
		(descr "Cherry MX keyswitch PCB Mount Keycap 1.00u")
		(tags "Cherry MX Keyboard Keyswitch Switch PCB Cutout Keycap 1.00u")
		(property "Reference" "SW8"
			(at 0 -8 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "Cherry_MX"
			(at 0 8 0)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr through_hole)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
		)
		(pad "" np_thru_hole circle
			(at -5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 4 4)
			(drill 4)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 0)
			(size 1.75 1.75)
			(drill 1.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole circle
			(at -3.81 -2.54)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" thru_hole circle
			(at 2.54 -5.08)
			(size 2.5 2.5)
			(drill 1.5)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(net 48 "BTN3")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3RD_PARTY}/3dmodels/com_github_perigoso_keyswitch-kicad-library/3d-library.3dshapes/SW_Cherry_MX_PCB.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 123.5 72.75 -90)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED3"
			(at 0.5 -2 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 270)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 90)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 63 "Net-(LED3-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 27 "WS2812_1")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "XL-1010RGBC-WS2812B:XL1010RGBCWS2812B"
		(layer "F.Cu")
		(at 131.45 87 180)
		(descr "XL-1010RGBC-WS2812B-4")
		(tags "LED")
		(property "Reference" "LED1"
			(at 0.5 -2 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "XL-1010RGBC-WS2812B"
			(at 0.5 3 0)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.lcsc.com/lcsc/2301111010_XINGLIGHT-XL-1010RGBC-WS2812B_C5349953.pdf"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "1010 Light Emitting Diodes (LED) ROHS"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "XINGLIGHT"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "XL-1010RGBC-WS2812B"
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0.5 3 0)
			(layer "F.Fab")
		)
		(pad "1" smd rect
			(at -0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 60 "Net-(LED1-DO)")
			(pinfunction "DO")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 0.475 -0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 2 "+5V")
			(pinfunction "VDD")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at 0.475 0.475 270)
			(size 0.45 0.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(net 38 "WS2812_2")
			(pinfunction "DI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/XL-1010RGBC-WS2812B--3DModel-STEP-510211 (1).STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "F.Cu")
		(at 128.05 128.25 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C43"
			(at 0 -1.16 90)
			(layer "F.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 1.16 90)
			(layer "F.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "F.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 115 109.6 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R5"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "1K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 92 "Net-(R5-Pad1)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 11 "Net-(DD1-~{CS})")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Buzzer_Beeper:Buzzer_Murata_PKLCS1212E"
		(layer "B.Cu")
		(at 114.9 118.8)
		(descr "Murata Buzzer https://www.murata.com/~/media/webrenewal/support/library/catalog/products/sound/p37e.ashx")
		(tags "Murata Buzzer Beeper")
		(property "Reference" "BZ1"
			(at 0 7 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "FUET-1230"
			(at 0 -7 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Buzzer, polarized"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "*Buzzer*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at -5.6 0)
			(size 1.2 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 2 "+5V")
			(pinfunction "+")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 5.6 0)
			(size 1.2 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 1 "Net-(BZ1--)")
			(pinfunction "-")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/CMT-1203-SMT-TR--3DModel-STEP-1.STEP"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 129.9 125.6 180)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 114.3 127.05 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C23"
			(at 0 1.16 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uF"
			(at 0 -1.16 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 142.5 77.9)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C24"
			(at 0 1.16 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 -1.16 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 10 "ENC_BTN")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Inductor_SMD:L_1008_2520Metric"
		(layer "B.Cu")
		(at 116.2 82.9 -90)
		(descr "Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator")
		(tags "inductor")
		(property "Reference" "L1"
			(at 0 2.05 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uH"
			(at 0 -2.05 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Inductor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "Choke_* *Coil* Inductor_* L_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -1.075 0 270)
			(size 1.25 2.2)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.2)
			(net 18 "Net-(DD2-LX1)")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 1.075 0 270)
			(size 1.25 2.2)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.2)
			(net 20 "Net-(DD2-LX2)")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Inductor_SMD.3dshapes/L_1008_2520Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "B.Cu")
		(at 120.55 90.2 90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R13"
			(at 0 1.17 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 44 "MOSI")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "kibuzzard-68CB22F7"
		(layer "B.Cu")
		(at 131.3 86.6 180)
		(descr "Generated with KiBuzzard")
		(tags "kb_params=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")
		(property "Reference" "kibuzzard-68CB22F7"
			(at 0 5.620961 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "G***"
			(at 0 -5.620961 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 121.7 126.2 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R6"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 49 "Net-(DD3-RUN)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 147.193513 95.422136 -45)
		(property "Reference" "G***"
			(at 0 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "Capacitor_SMD:C_0201_0603Metric"
		(layer "B.Cu")
		(at 114.3 128.73 -90)
		(descr "Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C22"
			(at 0 1.05 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 -1.05 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0.68 90)
			(layer "B.Fab")
		)
		(pad "" smd roundrect
			(at -0.345 0 270)
			(size 0.318 0.36)
			(layers "B.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "" smd roundrect
			(at 0.345 0 270)
			(size 0.318 0.36)
			(layers "B.Paste")
			(roundrect_rratio 0.25)
		)
		(pad "1" smd roundrect
			(at -0.32 0 270)
			(size 0.46 0.4)
			(layers "B.Cu" "B.Mask")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.32 0 270)
			(size 0.46 0.4)
			(layers "B.Cu" "B.Mask")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0201_0603Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 110 74.99 90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R4"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "5.1K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 57 "Net-(J1-CC2)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 132.353031 107.547768 180)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "TestPoint:TestPoint_Pad_1.5x1.5mm"
		(layer "B.Cu")
		(at 113.5 80.6 180)
		(descr "SMD rectangular pad as test Point, square 1.5mm side length")
		(tags "test point SMD pad rectangle square")
		(property "Reference" "TP1"
			(at 0 1.648 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "~"
			(at 0 -1.75 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "test point"
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "Pin* Test*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr exclude_from_pos_files)
		(fp_text user "${REFERENCE}"
			(at 0 1.65 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at 0 0 180)
			(size 1.5 1.5)
			(layers "B.Cu" "B.Mask")
			(net 2 "+5V")
			(pinfunction "1")
			(pintype "passive")
		)
		(embedded_fonts no)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 128.857659 73.733268)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 167.6 127.6 180)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 166.799999 106.7 135)
		(property "Reference" "G***"
			(at 0 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal"
		(layer "B.Cu")
		(at 115.9 74.56)
		(descr "USB 2.0 Type C Receptacle, GCT, 16P, top mounted, horizontal, 5A: https://gct.co/files/drawings/usb4105.pdf")
		(tags "USB C Type-C Receptacle SMD USB 2.0 16P 16C USB4105-15-A USB4105-15-A-060 USB4105-15-A-120 USB4105-GF-A USB4105-GF-A-060 USB4105-GF-A-120")
		(property "Reference" "J1"
			(at 0 5.5 180)
			(unlocked yes)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "USB_C_Receptacle_USB2.0_16P"
			(at 4.805 42.59 180)
			(unlocked yes)
			(layer "B.Fab")
		)
		(property "Datasheet" "https://www.usb.org/sites/default/files/documents/usb_type-c.zip"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "USB 2.0-only 16P Type-C Receptacle connector"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "USB*C*Receptacle*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "PCB Edge"
			(at 0 -3.1 180)
			(unlocked yes)
			(layer "Dwgs.User")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0.29 180)
			(unlocked yes)
			(layer "B.Fab")
		)
		(pad "" np_thru_hole circle
			(at -2.89 2.605)
			(size 0.65 0.65)
			(drill 0.65)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 2.89 2.605)
			(size 0.65 0.65)
			(drill 0.65)
			(layers "*.Cu" "*.Mask")
		)
		(pad "A1" smd roundrect
			(at -3.2 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "A4" smd roundrect
			(at -2.4 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pinfunction "VBUS")
			(pintype "passive")
		)
		(pad "A5" smd roundrect
			(at -1.25 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 59 "Net-(J1-CC1)")
			(pinfunction "CC1")
			(pintype "bidirectional")
		)
		(pad "A6" smd roundrect
			(at -0.25 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 58 "USB+")
			(pinfunction "D+")
			(pintype "bidirectional")
		)
		(pad "A7" smd roundrect
			(at 0.25 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 55 "USB-")
			(pinfunction "D-")
			(pintype "bidirectional")
		)
		(pad "A8" smd roundrect
			(at 1.25 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 54 "unconnected-(J1-SBU1-PadA8)")
			(pinfunction "SBU1")
			(pintype "bidirectional+no_connect")
		)
		(pad "A9" smd roundrect
			(at 2.4 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pinfunction "VBUS")
			(pintype "passive")
		)
		(pad "A12" smd roundrect
			(at 3.2 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "B1" smd roundrect
			(at 3.2 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "B4" smd roundrect
			(at 2.4 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pinfunction "VBUS")
			(pintype "passive")
		)
		(pad "B5" smd roundrect
			(at 1.75 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 57 "Net-(J1-CC2)")
			(pinfunction "CC2")
			(pintype "bidirectional")
		)
		(pad "B6" smd roundrect
			(at 0.75 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 58 "USB+")
			(pinfunction "D+")
			(pintype "bidirectional")
		)
		(pad "B7" smd roundrect
			(at -0.75 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 55 "USB-")
			(pinfunction "D-")
			(pintype "bidirectional")
		)
		(pad "B8" smd roundrect
			(at -1.75 3.68)
			(size 0.3 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 56 "unconnected-(J1-SBU2-PadB8)")
			(pinfunction "SBU2")
			(pintype "bidirectional+no_connect")
		)
		(pad "B9" smd roundrect
			(at -2.4 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pinfunction "VBUS")
			(pintype "passive")
		)
		(pad "B12" smd roundrect
			(at -3.2 3.68)
			(size 0.6 1.15)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "passive")
		)
		(pad "S1" thru_hole oval
			(at -4.32 -1.075)
			(size 1 1.8)
			(drill oval 0.6 1.4)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask" "B.Paste")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "SHIELD")
			(pintype "passive")
		)
		(pad "S1" thru_hole oval
			(at -4.32 3.105)
			(size 1 2.1)
			(drill oval 0.6 1.7)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask" "B.Paste")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "SHIELD")
			(pintype "passive")
		)
		(pad "S1" thru_hole oval
			(at 4.32 -1.075)
			(size 1 1.8)
			(drill oval 0.6 1.4)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask" "B.Paste")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "SHIELD")
			(pintype "passive")
		)
		(pad "S1" thru_hole oval
			(at 4.32 3.105)
			(size 1 2.1)
			(drill oval 0.6 1.7)
			(property pad_prop_heatsink)
			(layers "*.Cu" "*.Mask" "B.Paste")
			(remove_unused_layers no)
			(net 4 "Earth")
			(pinfunction "SHIELD")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_USB.3dshapes/USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "TestPoint:TestPoint_Pad_1.5x1.5mm"
		(layer "B.Cu")
		(at 110.8 80.6 180)
		(descr "SMD rectangular pad as test Point, square 1.5mm side length")
		(tags "test point SMD pad rectangle square")
		(property "Reference" "TP2"
			(at 0 1.648 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "~"
			(at 0 -1.75 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "test point"
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "Pin* Test*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr exclude_from_pos_files)
		(fp_text user "${REFERENCE}"
			(at 0 1.65 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at 0 0 180)
			(size 1.5 1.5)
			(layers "B.Cu" "B.Mask")
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(embedded_fonts no)
	)
	(footprint "IPS_ST7735_0_96:ST7735 0.96"
		(locked yes)
		(layer "B.Cu")
		(at 121.5498 75.4 180)
		(property "Reference" "HG1"
			(at 0.8498 1.15 0)
			(unlocked yes)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "~"
			(at 5.3498 -1.35 0)
			(unlocked yes)
			(layer "B.Fab")
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 5.3498 -2.85 0)
			(unlocked yes)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at 2.3997 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 51 "unconnected-(HG1-TP0-Pad1)")
			(pinfunction "TP0")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "2" smd rect
			(at 3.0997 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 52 "unconnected-(HG1-TP1-Pad2)")
			(pinfunction "TP1")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "3" smd rect
			(at 3.7998 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 44 "MOSI")
			(pinfunction "SDA")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "4" smd rect
			(at 4.5 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 31 "SCLK")
			(pinfunction "SCL")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "5" smd rect
			(at 5.1998 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 35 "RS")
			(pinfunction "RS")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "6" smd rect
			(at 5.8998 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 39 "RES")
			(pinfunction "RES")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "7" smd rect
			(at 6.5998 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 42 "!SS")
			(pinfunction "CS")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "8" smd rect
			(at 7.2999 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "9" smd rect
			(at 7.9999 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 53 "unconnected-(HG1-NC-Pad9)")
			(pinfunction "NC")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "10" smd rect
			(at 8.6999 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 3 "+3.3V")
			(pinfunction "VCC")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "11" smd rect
			(at 9.3999 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "LEDK")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "12" smd rect
			(at 10.0997 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 50 "Net-(HG1-LEDA)")
			(pinfunction "LEDA")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(pad "13" smd rect
			(at 10.7997 -14.5 180)
			(size 0.4 4)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "input")
			(solder_mask_margin 0.0508)
			(thermal_bridge_angle 0)
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/Library/0.96 - IPS LCD - No Glass - Reverse Mount.stp"
			(offset
				(xyz 6.5 -10.5 -1.5)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 180 90)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 154.1 91.6 90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C21"
			(at 0 1.16 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 -1.16 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 90)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 9 "ENC_B")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 90)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 110 77 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R3"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "5.1K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 59 "Net-(J1-CC1)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "INMP441:INMP441"
		(layer "B.Cu")
		(at 111.3225 127.7 -90)
		(property "Reference" "MK1"
			(at 0.04 3.258 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "INMP441ACEZ-R7"
			(at -2.851 -11.398 90)
			(layer "B.Fab")
		)
		(property "Datasheet" ""
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "MF" "TDK InvenSense"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "MAXIMUM_PACKAGE_HEIGHT" "1.05 mm"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Package" "LGA-9 TDK InvenSense"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Price" "None"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Check_prices" "https://www.snapeda.com/parts/INMP441ACEZ-R7/TDK/view-part/?ref=eda"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "STANDARD" "Manufacturer Recommendations"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "PARTREV" "1.1"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "SnapEDA_Link" "https://www.snapeda.com/parts/INMP441ACEZ-R7/TDK/view-part/?ref=snap"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "MP" "INMP441ACEZ-R7"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description_1" "60 Hz ~ 15 kHz Digital, I2S Microphone MEMS (Silicon) 1.62 V ~ 3.63 V Omnidirectional (-26dB ±3dB @ 94dB SPL) Solder Pads"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Availability" "In Stock"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "MANUFACTURER" "TDK InvenSense"
			(at 0 0 90)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(pad "" np_thru_hole circle
			(at -1.29 0 270)
			(size 0.75 0.75)
			(drill 0.75)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" smd rect
			(at 1.87 1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 89 "CLK1")
			(pinfunction "SCK")
			(pintype "input")
			(solder_mask_margin 0.102)
		)
		(pad "2" smd rect
			(at 0.82 1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 90 "DAT1")
			(pinfunction "SD")
			(pintype "output")
			(solder_mask_margin 0.102)
		)
		(pad "3" smd rect
			(at -0.23 1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 88 "WS1")
			(pinfunction "WS")
			(pintype "input")
			(solder_mask_margin 0.102)
		)
		(pad "4" smd rect
			(at -1.28 1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 4 "Earth")
			(pinfunction "L/R")
			(pintype "input")
			(solder_mask_margin 0.102)
		)
		(pad "5" smd custom
			(at -1.92 0 270)
			(size 0.1 0.1)
			(layers "B.Cu")
			(net 4 "Earth")
			(pinfunction "GND")
			(pintype "power_in")
			(options
				(clearance outline)
				(anchor rect)
			)
			(primitives
				(gr_poly
					(pts
						(xy 1.41 0.0025) (xy 1.11 0.003) (xy 1.109 0.026) (xy 1.107 0.051) (xy 1.104 0.076) (xy 1.1 0.101)
						(xy 1.094 0.125) (xy 1.087 0.149) (xy 1.078 0.173) (xy 1.069 0.196) (xy 1.058 0.219) (xy 1.046 0.241)
						(xy 1.033 0.262) (xy 1.019 0.283) (xy 1.003 0.303) (xy 0.987 0.322) (xy 0.97 0.34) (xy 0.952 0.357)
						(xy 0.933 0.373) (xy 0.913 0.389) (xy 0.892 0.403) (xy 0.871 0.416) (xy 0.849 0.428) (xy 0.826 0.439)
						(xy 0.803 0.448) (xy 0.779 0.457) (xy 0.755 0.464) (xy 0.731 0.47) (xy 0.706 0.474) (xy 0.681 0.477)
						(xy 0.656 0.479) (xy 0.63 0.48) (xy 0.605 0.479) (xy 0.58 0.477) (xy 0.555 0.474) (xy 0.53 0.47)
						(xy 0.506 0.464) (xy 0.482 0.457) (xy 0.458 0.448) (xy 0.435 0.439) (xy 0.412 0.428) (xy 0.39 0.416)
						(xy 0.369 0.403) (xy 0.348 0.388) (xy 0.328 0.373) (xy 0.309 0.357) (xy 0.291 0.339) (xy 0.273 0.321)
						(xy 0.257 0.302) (xy 0.242 0.282) (xy 0.227 0.261) (xy 0.214 0.24) (xy 0.202 0.218) (xy 0.191 0.195)
						(xy 0.182 0.172) (xy 0.173 0.148) (xy 0.166 0.124) (xy 0.16 0.1) (xy 0.156 0.075) (xy 0.153 0.05)
						(xy 0.151 0.025) (xy 0.15 0) (xy 0.151 -0.025) (xy 0.153 -0.05) (xy 0.156 -0.075) (xy 0.16 -0.1)
						(xy 0.166 -0.124) (xy 0.173 -0.148) (xy 0.182 -0.172) (xy 0.191 -0.195) (xy 0.202 -0.218) (xy 0.214 -0.24)
						(xy 0.227 -0.261) (xy 0.242 -0.282) (xy 0.257 -0.302) (xy 0.273 -0.321) (xy 0.291 -0.339) (xy 0.309 -0.357)
						(xy 0.328 -0.373) (xy 0.348 -0.388) (xy 0.369 -0.403) (xy 0.39 -0.416) (xy 0.412 -0.428) (xy 0.435 -0.439)
						(xy 0.458 -0.448) (xy 0.482 -0.457) (xy 0.506 -0.464) (xy 0.53 -0.47) (xy 0.555 -0.474) (xy 0.58 -0.477)
						(xy 0.605 -0.479) (xy 0.63 -0.48) (xy 0.656 -0.479) (xy 0.681 -0.477) (xy 0.706 -0.474) (xy 0.731 -0.47)
						(xy 0.755 -0.464) (xy 0.779 -0.457) (xy 0.803 -0.448) (xy 0.826 -0.439) (xy 0.849 -0.428) (xy 0.871 -0.416)
						(xy 0.892 -0.403) (xy 0.913 -0.389) (xy 0.933 -0.373) (xy 0.952 -0.357) (xy 0.97 -0.34) (xy 0.987 -0.322)
						(xy 1.003 -0.303) (xy 1.019 -0.283) (xy 1.033 -0.262) (xy 1.046 -0.241) (xy 1.058 -0.219) (xy 1.069 -0.196)
						(xy 1.078 -0.173) (xy 1.087 -0.149) (xy 1.094 -0.125) (xy 1.1 -0.101) (xy 1.104 -0.076) (xy 1.107 -0.051)
						(xy 1.109 -0.026) (xy 1.11 -0.003) (xy 1.41 -0.003) (xy 1.409 -0.042) (xy 1.406 -0.083) (xy 1.4 -0.123)
						(xy 1.393 -0.163) (xy 1.383 -0.203) (xy 1.372 -0.242) (xy 1.358 -0.28) (xy 1.343 -0.318) (xy 1.325 -0.355)
						(xy 1.306 -0.391) (xy 1.284 -0.425) (xy 1.261 -0.459) (xy 1.236 -0.491) (xy 1.21 -0.522) (xy 1.182 -0.552)
						(xy 1.152 -0.58) (xy 1.121 -0.606) (xy 1.089 -0.631) (xy 1.055 -0.654) (xy 1.021 -0.676) (xy 0.985 -0.695)
						(xy 0.948 -0.713) (xy 0.91 -0.728) (xy 0.872 -0.742) (xy 0.833 -0.753) (xy 0.793 -0.763) (xy 0.753 -0.77)
						(xy 0.713 -0.776) (xy 0.672 -0.779) (xy 0.63 -0.78) (xy 0.589 -0.779) (xy 0.548 -0.776) (xy 0.508 -0.77)
						(xy 0.468 -0.763) (xy 0.428 -0.753) (xy 0.389 -0.742) (xy 0.35 -0.728) (xy 0.313 -0.713) (xy 0.276 -0.695)
						(xy 0.24 -0.675) (xy 0.205 -0.654) (xy 0.172 -0.631) (xy 0.139 -0.606) (xy 0.108 -0.58) (xy 0.078 -0.552)
						(xy 0.05 -0.522) (xy 0.024 -0.491) (xy -0.001 -0.458) (xy -0.024 -0.425) (xy -0.045 -0.39) (xy -0.065 -0.354)
						(xy -0.083 -0.317) (xy -0.098 -0.28) (xy -0.112 -0.241) (xy -0.123 -0.202) (xy -0.133 -0.162)
						(xy -0.14 -0.122) (xy -0.146 -0.082) (xy -0.149 -0.041) (xy -0.15 0) (xy -0.149 0.041) (xy -0.146 0.082)
						(xy -0.14 0.122) (xy -0.133 0.162) (xy -0.123 0.202) (xy -0.112 0.241) (xy -0.098 0.28) (xy -0.083 0.317)
						(xy -0.065 0.354) (xy -0.045 0.39) (xy -0.024 0.425) (xy -0.001 0.458) (xy 0.024 0.491) (xy 0.05 0.522)
						(xy 0.078 0.552) (xy 0.108 0.58) (xy 0.139 0.606) (xy 0.172 0.631) (xy 0.205 0.654) (xy 0.24 0.675)
						(xy 0.276 0.695) (xy 0.313 0.713) (xy 0.35 0.728) (xy 0.389 0.742) (xy 0.428 0.753) (xy 0.468 0.763)
						(xy 0.508 0.77) (xy 0.548 0.776) (xy 0.589 0.779) (xy 0.63 0.78) (xy 0.672 0.779) (xy 0.713 0.776)
						(xy 0.753 0.77) (xy 0.793 0.763) (xy 0.833 0.753) (xy 0.872 0.742) (xy 0.91 0.728) (xy 0.948 0.713)
						(xy 0.985 0.695) (xy 1.021 0.676) (xy 1.055 0.654) (xy 1.089 0.631) (xy 1.121 0.606) (xy 1.152 0.58)
						(xy 1.182 0.552) (xy 1.21 0.522) (xy 1.236 0.491) (xy 1.261 0.459) (xy 1.284 0.425) (xy 1.306 0.391)
						(xy 1.325 0.355) (xy 1.343 0.318) (xy 1.358 0.28) (xy 1.372 0.242) (xy 1.383 0.203) (xy 1.393 0.163)
						(xy 1.4 0.123) (xy 1.406 0.083) (xy 1.409 0.042) (xy 1.41 0.003) (xy 1.41 0.0025)
					)
					(width 0.01)
					(fill yes)
				)
			)
		)
		(pad "6" smd rect
			(at -1.28 -1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 4 "Earth")
			(pinfunction "GND__1")
			(pintype "power_in")
			(solder_mask_margin 0.102)
		)
		(pad "7" smd rect
			(at -0.23 -1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 3 "+3.3V")
			(pinfunction "VDD")
			(pintype "power_in")
			(solder_mask_margin 0.102)
		)
		(pad "8" smd rect
			(at 0.82 -1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 3 "+3.3V")
			(pinfunction "CHIPEN")
			(pintype "input")
			(solder_mask_margin 0.102)
		)
		(pad "9" smd rect
			(at 1.87 -1.33 270)
			(size 0.4 0.6)
			(layers "B.Cu" "B.Mask")
			(net 4 "Earth")
			(pinfunction "GND__2")
			(pintype "power_in")
			(solder_mask_margin 0.102)
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/library/INMP441ACEZ-R7.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz -90 -0 -0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "B.Cu")
		(at 120.55 92.1 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R15"
			(at 0 1.17 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 31 "SCLK")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 146.5 90.6 -90)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C20"
			(at 0 1.16 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100nF"
			(at 0 -1.16 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 270)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 270)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 8 "ENC_A")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 112.5 86.9 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C19"
			(at 0 1.16 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "22uF"
			(at 0 -1.16 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 148.3 112 135)
		(property "Reference" "G***"
			(at 0 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 164.784726 75.415274)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "Capacitor_SMD:C_0805_2012Metric"
		(layer "B.Cu")
		(at 119.3 85.6)
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C18"
			(at 0 1.68 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "47uF"
			(at 0 -1.68 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 166.093513 91.622136 -45)
		(property "Reference" "G***"
			(at 0 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 135)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 135)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "Package_TO_SOT_SMD:SOT-23"
		(layer "B.Cu")
		(at 123.1 122.6625 -90)
		(descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236), generated with kicad-footprint-generator ipc_gullwing_generator.py")
		(tags "SOT TO_SOT_SMD")
		(property "Reference" "Q1"
			(at 0 2.4 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "SS8050"
			(at 0 -2.4 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "http://www.secosgmbh.com/datasheet/products/SSMPTransistor/SOT-23/SS8050.pdf"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "General Purpose NPN Transistor, 1.5A Ic, 25V Vce, SOT-23"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "SOT?23*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.9375 0.95 270)
			(size 1.475 0.6)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 91 "Net-(Q1-B)")
			(pinfunction "B")
			(pintype "input")
		)
		(pad "2" smd roundrect
			(at -0.9375 -0.95 270)
			(size 1.475 0.6)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pinfunction "E")
			(pintype "passive")
		)
		(pad "3" smd roundrect
			(at 0.9375 0 270)
			(size 1.475 0.6)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 1 "Net-(BZ1--)")
			(pinfunction "C")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Button_Switch_SMD:SW_SPST_PTS810"
		(layer "B.Cu")
		(at 118.3 127)
		(descr "C&K Components, PTS 810 Series, Microminiature SMT Top Actuated, http://www.ckswitches.com/media/1476/pts810.pdf")
		(tags "SPST Button Switch")
		(property "Reference" "SW2"
			(at 0 2.6 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "KMR221GLFS"
			(at 0 -2.6 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at -2.075 1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "1" smd rect
			(at 2.075 1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at -2.075 -1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 49 "Net-(DD3-RUN)")
			(pinfunction "2")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 2.075 -1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 49 "Net-(DD3-RUN)")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_PTS810.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 121.8 83.1 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R8"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 21 "Net-(DD2-PS)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 112.2 82.4 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C4"
			(at 0 1.16 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "22uF"
			(at 0 -1.16 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 123 120.2525)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R12"
			(at 0 1.3335 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "1K"
			(at 0 -1.17 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 91 "Net-(Q1-B)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 26 "BUZZER")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Button_Switch_SMD:SW_SPST_PTS810"
		(layer "B.Cu")
		(at 111.525 110.525)
		(descr "C&K Components, PTS 810 Series, Microminiature SMT Top Actuated, http://www.ckswitches.com/media/1476/pts810.pdf")
		(tags "SPST Button Switch")
		(property "Reference" "SW1"
			(at 0 2.6 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "KMR221GLFS"
			(at 0 -2.6 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Push button switch, generic, two pins"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at -2.075 1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "1" smd rect
			(at 2.075 1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "1")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at -2.075 -1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 92 "Net-(R5-Pad1)")
			(pinfunction "2")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at 2.075 -1.075)
			(size 1.05 0.65)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 92 "Net-(R5-Pad1)")
			(pinfunction "2")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Button_Switch_SMD.3dshapes/SW_SPST_PTS810.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 121.8 81.1 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R7"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 19 "Net-(DD2-EN)")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 142.5 75.9)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R14"
			(at 0 1.3335 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 10 "ENC_BTN")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 95 "Net-(R14-Pad2)")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Resistor_SMD:R_0402_1005Metric"
		(layer "B.Cu")
		(at 111.1 86.4 90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "resistor")
		(property "Reference" "R9"
			(at 0 1.17 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100R"
			(at 0 -1.17 90)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 50 "Net-(HG1-LEDA)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 90)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 148.2 91.1 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R10"
			(at 0 1.3335 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 93 "Net-(R10-Pad1)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 8 "ENC_A")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 119.9 110.3)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C17"
			(at 0 1.16 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uF"
			(at 0 -1.16 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "RT6150B-33GQW:RT6150B-33GQW"
		(layer "B.Cu")
		(at 119.45 83)
		(descr "W-Type 10L DFN 2.5x2.5 Package")
		(tags "Integrated Circuit")
		(property "Reference" "DD2"
			(at 0.59 1.95 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "RT6150B-33GQW"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" "https://datasheet.octopart.com/RT6150B-33GQW-Richtek-datasheet-82510503.pdf"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "IC REG BCK BST 3.3V 800MA 10WDFN"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Height" "0.8"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Manufacturer_Name" "RICHTEK"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Manufacturer_Part_Number" "RT6150B-33GQW"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Mouser Part Number" "835-RT6150B-33GQW"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Richtek/RT6150B-33GQW?qs=amGC7iS6iy8r3kS79wnzgg%3D%3D"
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Arrow Part Number" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Arrow Price/Stock" ""
			(at 0 0 180)
			(unlocked yes)
			(layer "B.Fab")
			(hide yes)
		)
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd rect
			(at -1.25 1 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 3 "+3.3V")
			(pinfunction "VOUT")
			(pintype "passive")
		)
		(pad "2" smd rect
			(at -1.25 0.5 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 20 "Net-(DD2-LX2)")
			(pinfunction "LX2")
			(pintype "passive")
		)
		(pad "3" smd rect
			(at -1.25 0 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "GND_1")
			(pintype "passive")
		)
		(pad "4" smd rect
			(at -1.25 -0.5 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 18 "Net-(DD2-LX1)")
			(pinfunction "LX1")
			(pintype "passive")
		)
		(pad "5" smd rect
			(at -1.25 -1 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 2 "+5V")
			(pinfunction "VIN")
			(pintype "passive")
		)
		(pad "6" smd rect
			(at 1.25 -1 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 19 "Net-(DD2-EN)")
			(pinfunction "EN")
			(pintype "passive")
		)
		(pad "7" smd rect
			(at 1.25 -0.5 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 21 "Net-(DD2-PS)")
			(pinfunction "PS")
			(pintype "passive")
		)
		(pad "8" smd rect
			(at 1.25 0 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 2 "+5V")
			(pinfunction "VINA")
			(pintype "passive")
		)
		(pad "9" smd rect
			(at 1.25 0.5 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "GND_2")
			(pintype "passive")
		)
		(pad "10" smd rect
			(at 1.25 1 270)
			(size 0.3 0.8)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 3 "+3.3V")
			(pinfunction "FB")
			(pintype "passive")
		)
		(pad "11" smd rect
			(at 0 0)
			(size 1.25 2.05)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(net 4 "Earth")
			(pinfunction "GND_3")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KIPRJMOD}/library/RT6150B-33GQW.stp"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0805_2012Metric"
		(layer "B.Cu")
		(at 119.3 80.4)
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C7"
			(at 0 1.68 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "47uF"
			(at 0 -1.68 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 2 "+5V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Capacitor_SMD:C_0402_1005Metric"
		(layer "B.Cu")
		(at 118.02 110.3 180)
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator")
		(tags "capacitor")
		(property "Reference" "C9"
			(at 0 1.16 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "2.2uF"
			(at 0 -1.16 0)
			(layer "B.Fab")
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Unpolarized capacitor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "C_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 7 "+1.1V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.48 0 180)
			(size 0.56 0.62)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 4 "Earth")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "LOGO"
		(layer "B.Cu")
		(at 114.658348 104.728125)
		(property "Reference" "G***"
			(at 0 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "LOGO"
			(at 0.75 0 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" ""
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(embedded_fonts no)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 153.1 91.6 -90)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R11"
			(at 0 1.3335 90)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "10K"
			(at 0 -1.17 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 90)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 94 "Net-(R11-Pad1)")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 270)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 9 "ENC_B")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "PCM_Resistor_SMD_AKL:R_0402_1005Metric"
		(layer "B.Cu")
		(at 142.5 76.9 180)
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), Alternate KiCad Library")
		(tags "resistor")
		(property "Reference" "R16"
			(at 0 1.3335 0)
			(layer "B.SilkS")
			(hide yes)
		)
		(property "Value" "100K"
			(at 0 -1.17 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Datasheet" "~"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property "Description" "Resistor"
			(at 0 0 0)
			(layer "B.Fab")
			(hide yes)
		)
		(property ki_fp_filters "R_*")
		(sheetname "/")
		(sheetfile "Madpad.kicad_sch")
		(attr smd)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "B.Fab")
		)
		(pad "1" smd roundrect
			(at -0.51 0 180)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 3 "+3.3V")
			(pintype "passive")
		)
		(pad "2" smd roundrect
			(at 0.51 0 180)
			(size 0.54 0.64)
			(layers "B.Cu" "B.Mask" "B.Paste")
			(roundrect_rratio 0.25)
			(net 10 "ENC_BTN")
			(pintype "passive")
		)
		(embedded_fonts no)
		(model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(gr_line
		(start 107.45 97.625)
		(end 108.425 98.6)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 118.65 101.75)
		(end 118 102.4)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 180.5 129.45)
		(end 180.5 72)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 117.55 102.4)
		(end 118 102.4)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 107.45 128.95)
		(end 108.85 130.35)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 179.6 130.35)
		(end 180.5 129.45)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 179.4 70.9)
		(end 108.5 70.9)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 107.45 71.95)
		(end 107.45 97.625)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 118.65 99.7)
		(end 118.65 101.3)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 118.65 101.3)
		(end 118.65 101.75)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 117.55 98.6)
		(end 118.65 99.7)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 108.5 70.9)
		(end 107.45 71.95)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 107.45 103.325)
		(end 107.45 128.95)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 117.55 102.4)
		(end 108.4 102.4)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 108.4 102.4)
		(end 107.45 103.325)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 108.85 130.35)
		(end 179.6 130.35)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 180.5 72)
		(end 179.4 70.9)
		(layer "Edge.Cuts")
	)
	(gr_line
		(start 117.55 98.6)
		(end 108.425 98.6)
		(layer "Edge.Cuts")
	)
	(gr_text "by @madjogger"
		(at 137.4 90.6 0)
		(layer "B.SilkS" knockout)
	)
	(zone
		(net 2)
		(net_name "+5V")
		(layer "F.Cu")
		(hatch edge 0.5)
		(priority 5)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 123.5 72.75) (xy 123.5 74.6) (xy 123.55 74.65) (xy 175 74.65) (xy 176 75.65) (xy 176 123.35)
				(xy 173.15 126.2) (xy 126.55 126.2) (xy 122.75 122.4) (xy 121.45 122.4) (xy 120.9625 122.8875) (xy 120.9625 124.0125)
				(xy 121.4 124.45) (xy 121.95 124.45) (xy 123.15 125.65) (xy 123.15 126.7) (xy 124.65 128.2) (xy 177.75 128.2)
				(xy 178 127.95) (xy 178 72.75) (xy 177.65 72.4) (xy 123.85 72.4)
			)
		)
	)
	(zone
		(net 3)
		(net_name "+3.3V")
		(layer "F.Cu")
		(hatch edge 0.5)
		(priority 4)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 120.8 111.5) (xy 123 111.5) (xy 123.2 111.7) (xy 123.2 112.75) (xy 123.05 112.9) (xy 121.7 112.9)
				(xy 121.3 112.5) (xy 121 112.5) (xy 120.8 112.3)
			)
		)
	)
	(zone
		(net 3)
		(net_name "+3.3V")
		(layer "F.Cu")
		(hatch edge 0.5)
		(priority 7)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 121.15 84.5) (xy 121.15 86.5) (xy 119.2 88.45) (xy 119.2 94.65) (xy 121.45 96.9) (xy 121.45 105.85)
				(xy 123.35 107.75) (xy 123.35 111.33) (xy 123.42 111.4) (xy 123.32 111.5) (xy 122.05 111.5) (xy 122 111.45)
				(xy 122 109.75) (xy 121.75 109.5) (xy 121.65 109.5) (xy 121.45 109.3) (xy 121.45 107.95) (xy 120.1 106.6)
				(xy 120.1 98.3) (xy 117.1 95.3) (xy 117.1 84.6) (xy 117.55 84.15) (xy 120.8 84.15)
			)
		)
	)
	(zone
		(net 4)
		(net_name "Earth")
		(layers "F.Cu" "B.Cu")
		(hatch edge 0.5)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 107.7 72.05) (xy 108.75 71) (xy 179.35 71) (xy 180.35 72) (xy 180.35 129.45) (xy 179.55 130.25)
				(xy 109.05 130.25) (xy 107.65 128.85) (xy 107.65 103.4) (xy 108.55 102.5) (xy 118.15 102.5) (xy 118.8 101.85)
				(xy 118.8 99.7) (xy 117.5 98.4) (xy 108.55 98.4) (xy 107.7 97.55)
			)
		)
	)
	(zone
		(net 0)
		(net_name "")
		(layers "F.Cu" "B.Cu" "F.SilkS" "B.SilkS" "F.Adhes" "B.Adhes" "F.Paste"
			"B.Paste" "Dwgs.User" "Cmts.User" "Eco1.User"
		)
		(hatch edge 0.5)
		(connect_pads yes
			(clearance 0)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "/")
		)
		(fill
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 158 92.9) (xy 158 98.7) (xy 158.6 99.3) (xy 159.4 99.3) (xy 160 98.7) (xy 160 92.9)
			)
		)
	)
	(zone
		(net 0)
		(net_name "")
		(layers "F.Cu" "B.Cu" "F.SilkS" "B.SilkS" "F.Adhes" "B.Adhes" "F.Paste"
			"B.Paste" "Dwgs.User" "Cmts.User" "Eco1.User"
		)
		(hatch edge 0.5)
		(connect_pads yes
			(clearance 0)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(keepout
			(tracks not_allowed)
			(vias not_allowed)
			(pads not_allowed)
			(copperpour not_allowed)
			(footprints not_allowed)
		)
		(placement
			(enabled no)
			(sheetname "/")
		)
		(fill
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 160 109.8) (xy 160 104) (xy 159.4 103.4) (xy 158.6 103.4) (xy 158 104) (xy 158 109.8)
			)
		)
	)
	(zone
		(net 2)
		(net_name "+5V")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 1)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 113.05 77.85) (xy 113.05 78.75) (xy 112.5 79.3) (xy 112.5 82.5) (xy 112.75 82.75) (xy 113.8 82.75)
				(xy 115.05 81.5) (xy 115.05 81.3) (xy 115.25 81.1) (xy 117.3 81.1) (xy 117.55 81.35) (xy 117.55 81.95)
				(xy 117.75 82.15) (xy 118.6 82.15) (xy 119.15 81.6) (xy 119.15 79.95) (xy 119.55 79.55) (xy 120.75 79.55)
				(xy 121.35 80.15) (xy 121.35 80.7) (xy 121.6 80.95) (xy 122.05 80.95) (xy 122.2 80.8) (xy 122.2 80.15)
				(xy 121 78.95) (xy 118.9 78.95) (xy 118.7 78.75) (xy 118.7 77.7) (xy 118.55 77.55) (xy 117.95 77.55)
				(xy 117.9 77.6) (xy 117.9 78.8) (xy 117.7 79) (xy 114.05 79) (xy 113.85 78.8) (xy 113.85 77.75)
				(xy 113.15 77.75)
			)
		)
	)
	(zone
		(net 2)
		(net_name "+5V")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 6)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 119.75 78.95) (xy 122.25 76.45) (xy 122.25 74.9) (xy 123.75 73.4) (xy 126.7 73.4) (xy 126.85 73.55)
				(xy 126.85 75.5) (xy 122.2 80.15) (xy 120.95 80.15)
			)
		)
	)
	(zone
		(net 3)
		(net_name "+3.3V")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 3)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 112.35 127.15) (xy 114.75 127.15) (xy 114.85 127.25) (xy 114.85 128.63) (xy 114.75 128.73) (xy 112.25 128.73)
				(xy 112.25 127.25)
			)
		)
	)
	(zone
		(net 20)
		(net_name "Net-(DD2-LX2)")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 1)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 118.65 83.25) (xy 117.8 83.25) (xy 117.75 83.2) (xy 115.25 83.2) (xy 115.1 83.35) (xy 115.1 84.4)
				(xy 115.3 84.6) (xy 117.4 84.6) (xy 117.5 84.5) (xy 117.5 83.85) (xy 117.55 83.8) (xy 118.7 83.8)
				(xy 118.7 83.3)
			)
		)
	)
	(zone
		(net 18)
		(net_name "Net-(DD2-LX1)")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 1)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 118.65 82.75) (xy 117.8 82.75) (xy 117.75 82.8) (xy 115.25 82.8) (xy 114.9 82.45) (xy 114.9 81.2)
				(xy 114.95 81.15) (xy 117.15 81.15) (xy 117.5 81.5) (xy 117.5 82.15) (xy 117.55 82.2) (xy 118.7 82.2)
				(xy 118.7 82.7)
			)
		)
	)
	(zone
		(net 3)
		(net_name "+3.3V")
		(layer "B.Cu")
		(hatch edge 0.5)
		(priority 2)
		(connect_pads yes
			(clearance 0.1016)
		)
		(min_thickness 0.1016)
		(filled_areas_thickness no)
		(fill yes
			(thermal_gap 0.5)
			(thermal_bridge_width 0.5)
		)
		(polygon
			(pts
				(xy 121.2 83.7) (xy 121.2 84.3) (xy 120.75 84.75) (xy 119.8 84.75) (xy 119.65 84.9) (xy 119.65 86.4)
				(xy 119.1 86.95) (xy 117.4 86.95) (xy 116.9 86.45) (xy 116.9 85.1) (xy 117.5 84.5) (xy 117.5 84)
				(xy 117.7 83.8) (xy 117.85 83.8) (xy 117.95 83.7)
			)
		)
	)
	(embedded_fonts no)
)
