<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.>Name>Value+->Name>Value>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+->NAME>VALUE>Name>Value+-<H3>JST-2-PTH-KIT</h3>
2-Pin JST, through-hole connector<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>Value+->NAME>VALUE>VALUE>NAMEStandard 2-pin 0.1" header. Use with <br>
- straight break away headers ( PRT-00116)<br>
- right angle break away headers (PRT-00553)<br>
- swiss pins (PRT-00743)<br>
- machine pins (PRT-00117)<br>
- female headers (PRT-00115)<br><br>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08433<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>Name>Value<b>RESISTOR</b><p>
chip>NAME>VALUE>NAME>VALUE>NAME>VALUE1/6W Thru-hole Resistor - *UNPROVEN*>NAME>VALUE>NAME>VALUE1/4W Resistor, 0.4" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value1/2W Resistor, 0.5" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value1W Resistor, 0.6" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value2W Resistor, 0.8" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value<h3>AXIAL-0.3-KIT</h3>
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br>
<br>
<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>ValueThis is the "EZ" version of the standard .3" spaced resistor package.<br>
It has a reduced top mask to make it harder to install upside-down.>Name>Value>NAME>VALUE>NAME>VALUE<b>Resistor</b>
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.<b>CHICAGO MINIATURE LAMP, INC.</b><p>
7022X Series SMT LEDs 1206 Package Size>NAME>VALUE<B>LED</B><p>
5 mm, square, Siemens>NAME>VALUE<B>LED</B><p>
2 x 5 mm, rectangle>NAME>VALUE<B>LED</B><p>
3 mm, round>NAME>VALUE<B>LED</B><p>
5 mm, round>NAME>VALUE<B>LED</B><p>
1 mm, round, Siemens>NAME>VALUE<B>LED BLOCK</B><p>
1 LED, Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE<b>LED HOLDER</b><p>
SiemensA+K->NAME>VALUE<b>LED HOLDER</b><p>
Siemens>NAME>VALUE+-<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>IR LED</B><p>
infrared emitting diode, Infineon
TO-18, lead spacing 2.54 mm, cathode marking<p>
Inifineon>NAME>VALUE<B>LED</B><p>
rectangle, 5.7 x 3.2 mm>NAME>VALUE<B>IR LED</B><p>
IR transmitter Siemens>NAME>VALUE<b>TOPLED® High-optical Power LED (HOP)</b><p>
Source: http://www.osram.convergy.de/ ... ls_t675.pdf>NAME>VALUEAC<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LB M676.pdfAC>NAME>VALUE<b>Super SIDELED® High-Current LED</b><p>
LG A672, LP A672 <br>
Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13)CA>NAME>VALUE<b>SmartLEDTM Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf>NAME>VALUE<b>Hyper TOPLED® RG Hyper-Bright LED</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf>NAME>VALUEAC<b>Hyper Micro SIDELED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf>NAME>VALUE<b>Power TOPLED®</b><p>
Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf>NAME>VALUECACC<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB Q993<br>
Source: http://www.osram.convergy.de/ ... Lb_q993.pdf>NAME>VALUE<b>Hyper CHIPLED Hyper-Bright LED</b><p>
LB R99A<br>
Source: http://www.osram.convergy.de/ ... lb_r99a.pdf>NAME>VALUE+<b>Mini TOPLED Santana®</b><p>
Source: http://www.osram.convergy.de/ ... LG M470.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_R971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf>NAME>VALUE<b>CHIPLED</b><p>
Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf>NAME>VALUE<b>CHIPLED-0603</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE<b>SmartLED TTW</b><p>
Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br>
Package able to withstand TTW-soldering heat<br>
Package suitable for TTW-soldering<br>
Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf>NAME>VALUE>NAME>VALUEAK>NAME>VALUE>NAME>VALUE>NAME>VALUEGnd<b>LED</b><p>
<u>OSRAM</u>:<br>
- <u>CHIPLED</u><br>
LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971
LH N974, LH R974<br>
LS Q976, LO Q976, LY Q976<br>
LO Q996<br>
- <u>Hyper CHIPLED</u><br>
LW Q18S<br>
LB Q993, LB Q99A, LB R99A<br>
- <u>SideLED</u><br>
LS A670, LO A670, LY A670, LG A670, LP A670<br>
LB A673, LV A673, LT A673, LW A673<br>
LH A674<br>
LY A675<br>
LS A676, LA A676, LO A676, LY A676, LW A676<br>
LS A679, LY A679, LG A679<br>
- <u>Hyper Micro SIDELED®</u><br>
LS Y876, LA Y876, LO Y876, LY Y876<br>
LT Y87S<br>
- <u>SmartLED</u><br>
LW L88C, LW L88S<br>
LB L89C, LB L89S, LG L890<br>
LS L89K, LO L89K, LY L89K<br>
LS L896, LA L896, LO L896, LY L896<br>
- <u>TOPLED</u><br>
LS T670, LO T670, LY T670, LG T670, LP T670<br>
LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br>
LG T671, LOG T671, LSG T671<br>
LB T673, LV T673, LT T673, LW T673<br>
LH T674<br>
LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br>
LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br>
LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br>
LW T67C<br>
LS T679, LY T679, LG T679<br>
LS T770, LO T770, LY T770, LG T770, LP T770<br>
LB T773, LV T773, LT T773, LW T773<br>
LH T774<br>
LS E675, LA E675, LY E675, LS T675<br>
LS T776, LA T776, LO T776, LY T776, LB T776<br>
LHGB T686<br>
LT T68C, LB T68C<br>
- <u>Hyper Mini TOPLED®</u><br>
LB M676<br>
- <u>Mini TOPLED Santana®</u><br>
LG M470<br>
LS M47K, LO M47K, LY M47K<br>
<p>
Source: http://www.osram.convergy.de/Classic 4-pin 3.2 x 2.5mm crystal<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Name>Value>Name>Value>NAME>VALUE>Name>Value>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b><p>
chip>NAME>VALUE>Name>Value>Name>Value>NAME>VALUE>NAME>VALUECTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.This is the "EZ" version of the .1" spaced ceramic thru-hole cap.<br>
It has reduced top mask to make it harder to put the component on the wrong side of the board.>Name>Value>NAME>VALUE<b>Capacitor</b>
Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUEDSGGeneric PMOSFET<b>Frames for Sheet and Layout</b>Date:>LAST_DATE_TIMESheet:>SHEETREV:TITLE:Document Number:>DRAWING_NAME<b>FRAME</b><p>
LETTER landscape>NAME>VALUE<b>Thin Shrink Small Outline Plastic 16</b><p>
http://www.maxim-ic.com .. MAX3223-MAX3243.pdf>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>Name>Value>NAME>VALUE>Name>Value>Name>Value<b>CAPACITOR</b><p>
chip>NAME>VALUE>NAME>VALUE1007 (2518 metric) package>NAME>VALUE>Name>Value>NAME>VALUE>NAME>VALUE1.3x1.3mm 1.7mm between. Fits Sumida CDRH2D09, CDRH2D18 inductor>NAME>VALUE>NAME>VALUE>Name>Value>Name>ValueFor Coiltronics/Cooper DR1030 series inductors>NAME>VALUE1W Resistor, 0.6" wide<p>
Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a>>Name>Value>Value>Name>NAME>VALUE>NAME>VALUE<b>Inductors</b><p>
Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers.<br>
SRN6045- 33uH, 20% 1.4A>NAME>VALUE<b>Small Outline Transistor</b>>NAME>VALUE>NAME>VALUE<b>Frames for Sheet and Layout</b>Date:>LAST_DATE_TIMESheet:>SHEETREV:TITLE:Document Number:>DRAWING_NAME<b>FRAME</b><p>
LETTER landscape<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>AVR Devices</b><p>
Version 7 - August 1, 2011.<br><br>
Added ATmega164P/324P/644P devices for DIP and TQFP.
<p>
Version 4 - March 11, 2008.<br><br>
This library now includes ONLY ATMEL AVR microcontrollers. It is the result of merging all other available device libraries available at http://www.cadsoft.de/download as of the time it was made. In addition to the legacy AT90* devices, it includes most ATMEGA devices including the new 48/88/168, most ATTiny devices and a set of ISP and JTAG pin headers.<p>
Based on the following sources:<p>
<ul>
<li>www.atmel.com
<li> file at90smcu_v400.zip
<li>avr.lbr and atmel.lbr as provided by CadSoft
<li>avr-1.lbr by David Blundell
<li>avr-2.lbr by Boris Zalokar
<li>avr-3.lbr by Carson Reynolds
<li>attiny24_44_84.lbr by Pawel Szramowski (ATTiny24/44/84 devices)
<li>atmel.lbr by Bob Starr (ISP headers)
<li>moates_custom_parts.lbr (edge ISP)
<li>other misc sources
</ul>
<author>Revised by David Blundell (blundar at gmail dot com) and others.</author>
<p>
<author>Added Mega162, Tiny2313 John Lussmyer (cougar at casadelgato.com)</author>
<p>
<author>Added XMega A1,A3,A4,D3,D4 John Lussmyer Aug 1, 2011(cougar at casadelgato.com)</author><b>100-lead Thin Quad Flat Pack Package Outline</b>>NAME>VALUETQFP 100R>NAME>VALUE>NAME>NAME>VALUE<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.50mil THT Package - <a href="http://www.produktinfo.conrad.com/datenblaetter/725000-749999/740125-da-01-en-STIFTLEISTE_10POL_RM_1_27.pdf">View Datasheet</a> - <a href="http://www.conrad.at/ce/de/product/740125/Stiftleiste-Print-Montage-gerade-Rastermass-127-mm-Pole-2-x-5-10120350-BKL-Electronic-Inhalt-1-St">Order Online @Conrad.at</a><br/>
<br/><b>PIN HEADER</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE>VALUE>NAME>VALUE>NAME>VALUE>NAME>NAME>VALUE>VALUE>NAME<b>Header 5x2</b>
Standard 10-pin dual row 0.1" header. Commonly used with AVR-ISP. Use with Spark Fun Electronics SKU: PRT-00778<b>Bourns Resistor Networks</b><p>
<author>Created by librarian@cadsoft.de</author><b>BOURNS RESISTOR NETWORK</b>>NAME>VALUE>NAME>VALUE<b>BOURNS RESISTOR NETWORK</b><h2><b>microBuilder.eu</b> Eagle Footprint Library</h2>
<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p>
<h3>Obligatory Warning</h3>
<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p>
<h3>License</h3>
<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p>
<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
</p>1mm<b>FIDUCIAL MARKER</b><p>
round, layers 1 + 16 + 21 + 39 + 49<b>Fiducial Alignment Points</b>
<p>Various fiducial points for machine vision alignment.</p>>NAME>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUESMT 6mm switch, EVQQ2 series
<p>http://www.ladyada.net/library/eagle</p>Vddio bypass
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.