<h3>SparkFun Microcontrollers</h3>
This library contains microcontrollers.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>48-pin QFN (7x7mm, 0.5mm pitch)</h3>
<p>Used on:
<ul><li>ATSAMD21G</il></ul>
</p>>NAME>VALUE<h3>48-pin TQFP (7x7mm, 0.5mm pitch)</h3>
<p>Used on:
<ul><li>ATSAMD21G</il></ul>
</p>>NAME>VALUE48-pin QFN (7x7mm, 0.5mm pitch)
Used on:
ATSAMD21G
48-pin TQFP (7x7mm, 0.5mm pitch)
Used on:
ATSAMD21G
<h3>Atmel SAMD21G SMART ARM-Based Microcontroller</h3>
<p>The Atmel ® | SMART ™ SAM D21 is a series of low-power microcontrollers using the 32-bit
ARM ® Cortex ® -M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and
32KB of SRAM. The SAM D21 devices operate at a maximum frequency of 48MHz and reach
2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical
peripheral modules, hex compatible code, identical linear address map and pin compatible
migration paths between all devices in the product series. All devices include intelligent and
flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive
touch button, slider and wheel user interfaces.</p>>Name>Value<h3>Atmel SAMD21G SMART ARM-Based Microcontroller</h3>
<p>The Atmel ® | SMART ™ SAM D21 is a series of low-power microcontrollers using the 32-bit
ARM ® Cortex ® -M0+ processor, and ranging from 32- to 64-pins with up to 256KB Flash and
32KB of SRAM. The SAM D21 devices operate at a maximum frequency of 48MHz and reach
2.46 CoreMark/MHz. They are designed for simple and intuitive migration with identical
peripheral modules, hex compatible code, identical linear address map and pin compatible
migration paths between all devices in the product series. All devices include intelligent and
flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive
touch button, slider and wheel user interfaces.</p>
<p><a href="https://cdn.sparkfun.com/datasheets/Dev/Arduino/Boards/Atmel-42181-SAM-D21_Datasheet.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a> (DEV-13664)</li>
<li><a href="https://www.sparkfun.com/products/13672">SparkFun SAMD21 Dev Breakout</a> (DEV-13672)</li>
</ul><h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Small Tactile Joystick w/ Select Switch</h3>
<p>A 5-way tactile switch allows for a joystick-like interface in a very small package.</p>
<p><a href="http://www.sparkfun.com/datasheets/Components/Buttons/SF303GJ26-3.pdf">Datasheet</a></p>UPUP>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://spec_sheets.e-switch.com/specs/P010338.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-5050)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/1101.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.apem.com/files/apem/brochures/ADTS6-ADTSM-KTSC6.pdf">Datasheet</a> (ADTSM63NVTR)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://cdn.sparkfun.com/datasheets/Components/Switches/N301102.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a></p>>Name>ValueSmall Tactile Joystick w/ Select Switch
A 5-way tactile switch allows for a joystick-like interface in a very small package.
DatasheetMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - PTH, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-5050)Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (ADTSM63NVTR)Momentary Switch (Pushbutton) - SPST - PTH, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet<h3>Small Tactile Joystick w/ Select Switch</h3>
<p>A 5-way tactile switch allows for a joystick-like interface in a very small package.</p>>Value>Name<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>NAME>VALUE<h3>Small Tactile Joystick w/ Select Switch</h3>
<p>A 5-way tactile switch allows for a joystick-like interface in a very small package.</p>
<p>Part #: 4UCON SF303GJ26</p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/10063">5-way Tactile Switch</a> (COM-10063)</li>
<li>Used on <a href="https://www.sparkfun.com/products/13035">SparkFun Block for Intel® Edison - OLED</a> (DEV-13035)</li>
<li>Used on <a href="https://www.sparkfun.com/products/13262">CAN-BUS Shield</a> (DEV-13262)</li>
</ul><h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<h4>Variants</h4>
<h5>PTH-12MM - 12mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul>
<h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li>
<li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul>
<h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">
SparkFun BigTime Watch Kit</a></li></ul>
<h5>SMD-12MM - 12mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul>
<h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul>
<h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul>
<h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li>
<li>REDUNDANT package connects both switch circuits together</li></ul>
<h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul>
<h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li>
<li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul>
<h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a></li></ul><h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring.>Name>Value+->Name>Value>NAME>VALUE>NAME>VALUEThis footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place.
You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line).
This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace"
to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers.
Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,
if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment
will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins.>NAME>VALUE>NAME>VALUE>NAME>VALUE>Name>Value+->NAME>VALUE>Name>Value+-<H3>JST-2-PTH-KIT</h3>
2-Pin JST, through-hole connector<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>Name>Value+->Name>Value+->VALUE>NAMEStandard 2-pin 0.1" header. Use with <br>
- straight break away headers ( PRT-00116)<br>
- right angle break away headers (PRT-00553)<br>
- swiss pins (PRT-00743)<br>
- machine pins (PRT-00117)<br>
- female headers (PRT-00115)<br><br>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08433<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find discrete LEDs for illumination or indication, but no displays.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE>NAME>VALUE<B>LED</B><p>
5 mm, round>NAME>VALUE<B>LED</B><p>
3 mm, round>NAME>VALUELS>NAME>VALUE<h3>LED 3MM - No Silk</h3>
3 mm, round>NAME>VALUE<h3>LED5MM-KIT</h3>
5MM Through-hole LED<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>NAME>VALUE>NAME>VALUE<b>LEDs</b>
Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others)<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find drivers, regulators, and amplifiers.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>Small Outline Transistor</b>>NAME>VALUE>Name>Value>NAME>VALUEMiniature single cell, fully integrated Li-Ion, Li-polymer charge management controller<br>
http://ww1.microchip.com/downloads/en/DeviceDoc/21984a.pdf<br>
IC-09995<b>V_REG MIC5219</b>
Standard 3.3V and 5V 500mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5219. BP (by-pass) pin is used to lower output noise with 470pF cap, may be left open.<h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>3.3V Voltage Supply</h3>>VALUE<h3>Digital Ground Supply</h3>>VALUE<h3>3.3V Supply Symbol</h3>
<p>Power supply symbol for a specifically-stated 3.3V source.</p><h3>Ground Supply Symbol</h3>
<p>Generic signal ground supply symbol.</p><b>LPH-7366: PCD8544-based Nokia 5110 monochrome LCD display</b>
<p><b>Doublecheck before using!</b></p>>NAME>VALUELPH-7366>VALUE>NAME<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>VALUE>VALUE>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>V_BATT</b><br>
Generic symbol for the battery input to a system.<h3>SparkFun Electronics' preferred foot prints</h3>
In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
<br><br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br><br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.>NAME>VALUE<B>Diode</B><p>
Basic SMA packaged diode. Good for reverse polarization protection. Common part #: MBRA140>NAME>VALUE>NAME>VALUESchottky diodes in SFE's production catalog<p>
BAT20J 1A 23V 0.62Vf<br>
RB751 120mA 40V 0.37Vf<br>
PMEG4005EJ 0.5A 40V 0.42Vf<br>
MBRA140 1A 40V 0.5Vf<br>
B340A 3A 40V SMA <br><h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE3014 Package for LEDs>Name>ValueLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUE3014 Package for LEDs<h3>LED</h3>
<p></p>>NAME>VALUE<h3>White SMD LED</h3>
Used in manufacturing several products at SparkFun.
<p><b>Packages:</b>
<ul><li><b> 0603</b> - Bright White SMD 0603 package<a href="http://www.kingbrightusa.com/product.asp?catalog_name=LED&product_id=APT1608QWF/D">[Product Link]</li>
<li><b> 1206</b> - Bright White SMD1206 package <a href="http://www.kingbrightusa.com/product.asp?catalog_name=LED&product_id=APT3216QWF/D">[Product Link]</li>
<li><b> 3014</b> - Super Bright SMD 3014 package <a href="http://www.lumileds.com/uploads/459/DS208-pdf">[Datasheet]</li>
<ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/13169”>Blackberry Trackballer Breakout</a></li>
<li><a href=”https://www.sparkfun.com/products/12651”>Digital SandBox</a></li>
</ul></p><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Plated Through Hole - 4 Pin</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 4 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>SMD- 4 Pin Right Angle </h3>
<p>Specifications:
<ul><li>Pin count:4</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_04</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Right Angle Male Header SMT</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
<li>JST_2MM_MALE</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.15"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST-Vertical Male Header SMT </h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 2mm</li>
</ul></p>
<p><a href=”http://www.4uconnector.com/online/object/4udrawing/20404.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value<h3>Screw Terminal 5mm Pitch -2 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 5mm/197mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Locking Footprint</h3>
Holes are staggered by 0.005" from center to hold pins while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Molex 2-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset from center by 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads with Locking Footprint</h3>
Pins are staggered by 0.005" from center to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking</h3>
Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - Long Pads without Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Plated Through Hole - 0.1" holes</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.2"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Pogo Pins Connector - No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE<h3>JST 2 Pin Right Angle Plated Through Hole- No Silk</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> No silk outline of connector.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>JST 2 Pin Right Angle Plated Through Hole - KIT</h3>
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
<br> This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
<br> This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Connectors/JST%282%29-01548.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>Name>Value+-<h3>Spring Terminal- PCB Mount 2 Pin PTH</h3>
tDocu marks the spring arms
<p>Specifications:
<ul><li>Pin count: 4</li>
<li>Pin pitch: 0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/SpringTerminal.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p><h3>2 Pin Screw Terminal - 2.54mm</h3>
<p>Specifications:
<ul><li>Pin count:2</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_02</li>
</ul></p>>NAME>VALUE2 pin poke-home connector
part number 2062-2P from STA>NAME>VALUE>NAME>VALUEPlated Through Hole - 4 Pin
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole - 4 Pin No Silk Outline
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
SMD- 4 Pin Right Angle
Specifications:
Pin count:4
Pin pitch:0.1"
Example device(s):
CONN_04
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST-Right Angle Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST_2MM_MALE
Plated Through Hole
Specifications:
Pin count:2
Pin pitch:0.15"
Example device(s):
CONN_02
JST-Vertical Male Header SMT
Specifications:
Pin count: 2
Pin pitch: 2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Screw Terminal 5mm Pitch -2 Pin PTH
Specifications:
Pin count: 2
Pin pitch: 5mm/197mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Locking Footprint
Holes are staggered by 0.005" from center to hold pins while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Molex 2-Pin Plated Through-Hole Locking Footprint
Holes are offset from center by 0.005" to hold pins in place during soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads with Locking Footprint
Pins are staggered by 0.005" from center to hold pins in place while soldering.
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH Locking
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - Long Pads without Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Plated Through Hole - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Plated Through Hole - 0.1" holes
Specifications:
Pin count:2
Pin pitch:0.2"
Example device(s):
CONN_02
Pogo Pins Connector - No Silk Outline
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
Screw Terminal 3.5mm Pitch - 2 Pin PTH No Silk Outline
Specifications:
Pin count: 2
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole- No Silk
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
No silk outline of connector.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
JST 2 Pin Right Angle Plated Through Hole - KIT
tDocu indicate polarity for connections that match SparkFun LiPo battery terminations.
This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad.
This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_02
Spring Terminal- PCB Mount 2 Pin PTH
tDocu marks the spring arms
Specifications:
Pin count: 4
Pin pitch: 0.1"
Datasheet referenced for footprint
Example device(s):
CONN_02
2 Pin Screw Terminal - 2.54mm
Specifications:
Pin count:2
Pin pitch:0.1"
Example device(s):
CONN_02
2 pin poke-home connector
part number 2062-2P from STA<h3>SparkFun I<sup>2</sup>C Standard Pinout Header</h3>
<p>SparkFun has standardized on a pinout for all I<sup>2</sup>C based sensor breakouts.<br>>VALUE>NAMESDAVCCGNDSCL<h3>2 Pin Connection</h3>>VALUE>NAME<h3>SparkFun I<sup>2</sup>C Standard Pinout Header</h3>
<p>SparkFun has standardized on a pinout for all I<sup>2</sup>C based sensor breakouts.<br>
<br>
This pinout allows I<sup>2</sup>C boards to be plugged directly into the headers on Arduino Uno compatible boards, and
to be daisy chained easily.</p>
<p><b>Example SparkFun Products:</b>
<ul><li><a href="https://www.sparkfun.com/products/13676">SparkFun Atmospheric Sensor Breakout - BME280</a></li>
<li><a href=”https://www.sparkfun.com/products/11084”>SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2</a></li>
<li><a href=”https://www.sparkfun.com/products/12785”>SparkFun TOF Range Finder Sensor - VL6180</a></li>
</ul></p><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br>
2.54_SCREWTERM for use with PRT-10571.<br><br>
3.5mm Screw Terminal footprints for PRT-08084<br><br>
5mm Screw Terminal footprints for use with PRT-08432<h3>SparkFun Sensors</h3>
This library contains sensors- accelerometers, gyros, compasses, magnetometers, light sensors, imagers, temp sensors, etc.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>24-Pin QFN - 3.0 x 3.0 mm - No center pad</h3>
<p><b>Note:</b> No center pad per "Exposed Die Pad Precautions" section of the <a href="http://www.digikey.com/Web%20Export/Supplier%20Content/invensense-1428/pdf/invensense-mems-handling.pdf">InvenSense MEMS Handling application note</a>.</p>>Name>Value24-Pin QFN - 3.0 x 3.0 mm - No center pad
Note: No center pad per "Exposed Die Pad Precautions" section of the InvenSense MEMS Handling application note.<b>MPU-9250</b><br />
9DOF IMU>NAME>VALUE<h3>MPU-9250 9 Degree of Freedom IMU </h3>
<p>System in Package that contains MPU-6500 & AK8963 <br>
NC pin 19. 2-6 & 14-17 not internally connected. May be used for PCB trace routing.
<br><a href=”https://cdn.sparkfun.com/assets/learn_tutorials/5/5/0/MPU9250REV1.0.pdf”>Datasheet</a></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/14001”>SparkFun 9DoF Razor IMU M0</a></li>
<li><a href=”https://www.sparkfun.com/products/13762”>SparkFun IMU Breakout - MPU-9250</a></li>
</ul></p><h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>2x6mm Cylindrical Can (Radial) PTH Crystal</h3>
<p>Example product: <a href="https://www.sparkfun.com/products/540">32kHz crystal</a></p>
<p><a href="http://www.ecsxtal.com/store/pdf/ECS-3x8.pdf">Example datasheet</a> (ECS-2X6)</p>>NAME>VALUE<h3>6.0x2.0mm Cylindrical Can (Radial) SMD Crystal</h3>
<p><a href="http://cfm.citizen.co.jp/english/product/pdf/CMR200T.pdf">Example</a></p>>Name>Value<h3>2x6mm Cylindrical Can (Radial) PTH Crystal</h3>
This is the "KIT" version, which has limited top masking for improved ease of assembly.
<p>Example product: <a href="https://www.sparkfun.com/products/540">32kHz crystal</a></p>
<p><a href="http://www.ecsxtal.com/store/pdf/ECS-3x8.pdf">Example datasheet</a> (ECS-2X6)</p>>NAME>VALUE<h3>3.2 x 1.5mm SMD Crystal Package</h3>
<p>Example: <a href="http://www.sii.co.jp/en/quartz/files/2013/03/file_PRODUCT_MASTER_50812_GRAPHIC03.pdf">SX-32S</a></p>>Name>Value<h3>7x1.5mm MC-146 Flat Lead SMD Crystal</h3>
<p><a href="https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf">Example Datasheet</a></p>>Name>Value2x6mm Cylindrical Can (Radial) PTH Crystal
Example product: 32kHz crystal
Example datasheet (ECS-2X6)6.0x2.0mm Cylindrical Can (Radial) SMD Crystal
Example2x6mm Cylindrical Can (Radial) PTH Crystal
This is the "KIT" version, which has limited top masking for improved ease of assembly.
Example product: 32kHz crystal
Example datasheet (ECS-2X6)3.2 x 1.5mm SMD Crystal Package
Example: SX-32S7x1.5mm MC-146 Flat Lead SMD Crystal
Example Datasheet<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>32.768kHz Crystal</h3>
<p><ul><li>Frequency: 32.768kHz</li>
<li>Frequency Stability: ±20ppm</li>
<li>Load Capacitance: 12.5pF (PTH-2X6 & SMD-3.2X1.5), 6pF (SMD-2X6)</li></ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/11734”>SparkFun BigTime Watch Kit</a></li>
<li><a href=”https://www.sparkfun.com/products/13990”>SparkFun nRF52832 Breakout</a></li>
<li><a href=”https://www.sparkfun.com/products/12708”>SparkFun Real Time Clock Module</a></li>
</ul></p><b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
http://www.secc.co.jp/pdf/os_e/2004/e_os_all.pdf <b>(SANYO)</b>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0>
<tr valign="top">
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table><b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664>NAME>VALUE<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf>NAME>VALUESource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUECAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITOR
grid 2.5 mm, outline 2.4 x 4.4 mmCAPACITOR
grid 2.5 mm, outline 2.5 x 5 mmCAPACITOR
grid 2.5 mm, outline 3 x 5 mmCAPACITOR
grid 2.5 mm, outline 4 x 5 mmCAPACITOR
grid 2.5 mm, outline 5 x 5 mmCAPACITOR
grid 2.5 mm, outline 6 x 5 mmCAPACITOR
grid 2.5 mm + 5 mm, outline 2.4 x 7 mmCAPACITOR
grid 2.5 + 5 mm, outline 2.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 3.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 4.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 5.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 2.4 x 4.4 mmCAPACITOR
grid 5 mm, outline 2.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 4.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 3 x 7.5 mmCAPACITOR
grid 5 mm, outline 5 x 7.5 mmCAPACITOR
grid 5 mm, outline 5.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 7.5 x 7.5 mmCAPACITOR
Horizontal, grid 5 mm, outline 7.5 x 7.5 mmCAPACITOR
grid 7.5 mm, outline 3.2 x 10.3 mmCAPACITOR
grid 7.5 mm, outline 4.2 x 10.3 mmCAPACITOR
grid 7.5 mm, outline 5.2 x 10.6 mmCAPACITOR
grid 10.2 mm, outline 4.3 x 13.3 mmCAPACITOR
grid 10.2 mm, outline 5.4 x 13.3 mmCAPACITOR
grid 10.2 mm, outline 6.4 x 13.3 mmCAPACITOR
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mmCAPACITOR
grid 15 mm, outline 5.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 6.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 7.2 x 18.3 mmCAPACITOR
grid 15 mm, outline 8.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 9.1 x 18.2 mmCAPACITOR
grid 22.5 mm, outline 6.2 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 7.4 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 8.7 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 10.8 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 11.3 x 26.8 mmCAPACITOR
grid 27.5 mm, outline 9.3 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 11.3 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 13.4 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 20.5 x 31.6 mmCAPACITOR
grid 32.5 mm, outline 13.7 x 37.4 mmCAPACITOR
grid 32.5 mm, outline 16.2 x 37.4 mmCAPACITOR
grid 32.5 mm, outline 18.2 x 37.4 mmCAPACITOR
grid 37.5 mm, outline 19.2 x 41.8 mmCAPACITOR
grid 37.5 mm, outline 20.3 x 41.8 mmCAPACITOR
grid 5 mm, outline 3.5 x 7.5 mmCAPACITOR
grid 37.5 mm, outline 15.5 x 41.8 mmCAPACITOR
grid 7.5 mm, outline 6.3 x 10.6 mmCAPACITOR
grid 27.5 mm, outline 15.4 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 17.3 x 31.6 mmCeramic Chip Capacitor KEMET 0204 reflow solder
Metric Code Size 1005Ceramic Chip Capacitor KEMET 0603 reflow solder
Metric Code Size 1608Ceramic Chip Capacitor KEMET 0805 reflow solder
Metric Code Size 2012Ceramic Chip Capacitor KEMET 1206 reflow solder
Metric Code Size 3216Ceramic Chip Capacitor KEMET 1210 reflow solder
Metric Code Size 3225Ceramic Chip Capacitor KEMET 1812 reflow solder
Metric Code Size 4532Ceramic Chip Capacitor KEMET 1825 reflow solder
Metric Code Size 4564Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664
Source: http://www.vishay.com/docs/10129/hpc0201a.pdfSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdfCAPACITOR
Source: AVX .. aphvc.pdfCAPACITOR
Source: AVX .. aphvc.pdfCAPACITOR>NAME>VALUE<B>CAPACITOR</B>, European symbol<b>Resistors, Capacitors, Inductors</b><p>
Based on the previous libraries:
<ul>
<li>r.lbr
<li>cap.lbr
<li>cap-fe.lbr
<li>captant.lbr
<li>polcap.lbr
<li>ipc-smd.lbr
</ul>
All SMD packages are defined according to the IPC specifications and CECC<p>
<author>Created by librarian@cadsoft.de</author><p>
<p>
for Electrolyt Capacitors see also :<p>
www.bccomponents.com <p>
www.panasonic.com<p>
www.kemet.com<p>
<p>
for trimmer refence see : <u>www.electrospec-inc.com/cross_references/trimpotcrossref.asp</u><p>
<map name="nav_main">
<area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title="">
<area shape="rect" coords="0,24,140,51" href="../about.asp" title="">
<area shape="rect" coords="1,52,140,77" href="../rfq.asp" title="">
<area shape="rect" coords="0,78,139,103" href="../products.asp" title="">
<area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title="">
<area shape="rect" coords="1,129,138,150" href="../edge.asp" title="">
<area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title="">
<area shape="rect" coords="0,179,139,201" href="../comments.asp" title="">
<area shape="rect" coords="1,203,138,231" href="../directory.asp" title="">
<area shape="default" nohref>
</map>
<html>
<title></title>
<LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css">
<body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0">
<table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%">
<tr valign="top">
</td>
<! <td width="10"> </td>
<td width="90%">
<b><font color="#0000FF" size="4">TRIM-POT CROSS REFERENCE</font></b>
<P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2>
<TR>
<TD COLSPAN=8>
<FONT SIZE=3 FACE=ARIAL><B>RECTANGULAR MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BOURNS</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">BI TECH</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">DALE-VISHAY</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PHILIPS/MEPCO</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MURATA</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">PANASONIC</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">SPECTROL</FONT>
</B>
</TD>
<TD ALIGN=CENTER>
<B>
<FONT SIZE=3 FACE=ARIAL color="#FF0000">MILSPEC</FONT>
</B>
</TD><TD> </TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3 >
3005P<BR>
3006P<BR>
3006W<BR>
3006Y<BR>
3009P<BR>
3009W<BR>
3009Y<BR>
3057J<BR>
3057L<BR>
3057P<BR>
3057Y<BR>
3059J<BR>
3059L<BR>
3059P<BR>
3059Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
89P<BR>
89W<BR>
89X<BR>
89PH<BR>
76P<BR>
89XH<BR>
78SLT<BR>
78L ALT<BR>
56P ALT<BR>
78P ALT<BR>
T8S<BR>
78L<BR>
56P<BR>
78P<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
T18/784<BR>
783<BR>
781<BR>
-<BR>
-<BR>
-<BR>
2199<BR>
1697/1897<BR>
1680/1880<BR>
2187<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
8035EKP/CT20/RJ-20P<BR>
-<BR>
RJ-20X<BR>
-<BR>
-<BR>
-<BR>
1211L<BR>
8012EKQ ALT<BR>
8012EKR ALT<BR>
1211P<BR>
8012EKJ<BR>
8012EKL<BR>
8012EKQ<BR>
8012EKR<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
2101P<BR>
2101W<BR>
2101Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
2102L<BR>
2102S<BR>
2102Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVMCOG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
43P<BR>
43W<BR>
43Y<BR>
-<BR>
-<BR>
-<BR>
-<BR>
40L<BR>
40P<BR>
40Y<BR>
70Y-T602<BR>
70L<BR>
70P<BR>
70Y<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
RT/RTR12<BR>
RT/RTR12<BR>
RT/RTR12<BR>
-<BR>
RJ/RJR12<BR>
RJ/RJR12<BR>
RJ/RJR12<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SQUARE MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3250L<BR>
3250P<BR>
3250W<BR>
3250X<BR>
3252P<BR>
3252W<BR>
3252X<BR>
3260P<BR>
3260W<BR>
3260X<BR>
3262P<BR>
3262W<BR>
3262X<BR>
3266P<BR>
3266W<BR>
3266X<BR>
3290H<BR>
3290P<BR>
3290W<BR>
3292P<BR>
3292W<BR>
3292X<BR>
3296P<BR>
3296W<BR>
3296X<BR>
3296Y<BR>
3296Z<BR>
3299P<BR>
3299W<BR>
3299X<BR>
3299Y<BR>
3299Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66X ALT<BR>
-<BR>
64W ALT<BR>
-<BR>
64P ALT<BR>
64W ALT<BR>
64X ALT<BR>
64P<BR>
64W<BR>
64X<BR>
66X ALT<BR>
66P ALT<BR>
66W ALT<BR>
66P<BR>
66W<BR>
66X<BR>
67P<BR>
67W<BR>
67X<BR>
67Y<BR>
67Z<BR>
68P<BR>
68W<BR>
68X<BR>
67Y ALT<BR>
67Z ALT<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
5050<BR>
5091<BR>
5080<BR>
5087<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
T63YB<BR>
T63XB<BR>
-<BR>
-<BR>
-<BR>
5887<BR>
5891<BR>
5880<BR>
-<BR>
-<BR>
-<BR>
T93Z<BR>
T93YA<BR>
T93XA<BR>
T93YB<BR>
T93XB<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
8026EKP<BR>
8026EKW<BR>
8026EKM<BR>
8026EKP<BR>
8026EKB<BR>
8026EKM<BR>
1309X<BR>
1309P<BR>
1309W<BR>
8024EKP<BR>
8024EKW<BR>
8024EKN<BR>
RJ-9P/CT9P<BR>
RJ-9W<BR>
RJ-9X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
3103P<BR>
3103Y<BR>
3103Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3105P/3106P<BR>
3105W/3106W<BR>
3105X/3106X<BR>
3105Y/3106Y<BR>
3105Z/3105Z<BR>
3102P<BR>
3102W<BR>
3102X<BR>
3102Y<BR>
3102Z<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMCBG<BR>
EVMCCG<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
55-1-X<BR>
55-4-X<BR>
55-3-X<BR>
55-2-X<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
50-2-X<BR>
50-4-X<BR>
50-3-X<BR>
-<BR>
-<BR>
-<BR>
64P<BR>
64W<BR>
64X<BR>
64Y<BR>
64Z<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RT/RTR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RJ/RJR22<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RT/RTR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RJ/RJR26<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RT/RTR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
RJ/RJR24<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
</TD>
</TR>
<TR>
<TD COLSPAN=8>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BOURN</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MURATA</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>SPECTROL</B></FONT>
</TD>
<TD ALIGN=CENTER>
<FONT SIZE=3 FACE=ARIAL><B>MILSPEC</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3323P<BR>
3323S<BR>
3323W<BR>
3329H<BR>
3329P<BR>
3329W<BR>
3339H<BR>
3339P<BR>
3339W<BR>
3352E<BR>
3352H<BR>
3352K<BR>
3352P<BR>
3352T<BR>
3352V<BR>
3352W<BR>
3362H<BR>
3362M<BR>
3362P<BR>
3362R<BR>
3362S<BR>
3362U<BR>
3362W<BR>
3362X<BR>
3386B<BR>
3386C<BR>
3386F<BR>
3386H<BR>
3386K<BR>
3386M<BR>
3386P<BR>
3386S<BR>
3386W<BR>
3386X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
25P<BR>
25S<BR>
25RX<BR>
82P<BR>
82M<BR>
82PA<BR>
-<BR>
-<BR>
-<BR>
91E<BR>
91X<BR>
91T<BR>
91B<BR>
91A<BR>
91V<BR>
91W<BR>
25W<BR>
25V<BR>
25P<BR>
-<BR>
25S<BR>
25U<BR>
25RX<BR>
25X<BR>
72XW<BR>
72XL<BR>
72PM<BR>
72RX<BR>
-<BR>
72PX<BR>
72P<BR>
72RXW<BR>
72RXL<BR>
72X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
T7YB<BR>
T7YA<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
TXD<BR>
TYA<BR>
TYP<BR>
-<BR>
TYD<BR>
TX<BR>
-<BR>
150SX<BR>
100SX<BR>
102T<BR>
101S<BR>
190T<BR>
150TX<BR>
101<BR>
-<BR>
-<BR>
101SX<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ET6P<BR>
ET6S<BR>
ET6X<BR>
RJ-6W/8014EMW<BR>
RJ-6P/8014EMP<BR>
RJ-6X/8014EMX<BR>
TM7W<BR>
TM7P<BR>
TM7X<BR>
-<BR>
8017SMS<BR>
-<BR>
8017SMB<BR>
8017SMA<BR>
-<BR>
-<BR>
CT-6W<BR>
CT-6H<BR>
CT-6P<BR>
CT-6R<BR>
-<BR>
CT-6V<BR>
CT-6X<BR>
-<BR>
-<BR>
8038EKV<BR>
-<BR>
8038EKX<BR>
-<BR>
-<BR>
8038EKP<BR>
8038EKZ<BR>
8038EKW<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
3321H<BR>
3321P<BR>
3321N<BR>
1102H<BR>
1102P<BR>
1102T<BR>
RVA0911V304A<BR>
-<BR>
RVA0911H413A<BR>
RVG0707V100A<BR>
RVA0607V(H)306A<BR>
RVA1214H213A<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
3104B<BR>
3104C<BR>
3104F<BR>
3104H<BR>
-<BR>
3104M<BR>
3104P<BR>
3104S<BR>
3104W<BR>
3104X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
EVMQ0G<BR>
EVMQIG<BR>
EVMQ3G<BR>
EVMS0G<BR>
EVMQ0G<BR>
EVMG0G<BR>
-<BR>
-<BR>
-<BR>
EVMK4GA00B<BR>
EVM30GA00B<BR>
EVMK0GA00B<BR>
EVM38GA00B<BR>
EVMB6<BR>
EVLQ0<BR>
-<BR>
EVMMSG<BR>
EVMMBG<BR>
EVMMAG<BR>
-<BR>
-<BR>
EVMMCS<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
EVMM1<BR>
-<BR>
-<BR>
EVMM0<BR>
-<BR>
-<BR>
EVMM3<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
62-3-1<BR>
62-1-2<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67R<BR>
-<BR>
67P<BR>
-<BR>
-<BR>
-<BR>
-<BR>
67X<BR>
63V<BR>
63S<BR>
63M<BR>
-<BR>
-<BR>
63H<BR>
63P<BR>
-<BR>
-<BR>
63X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
RJ/RJR50<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P> <P>
<TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3>
<TR>
<TD COLSPAN=7>
<FONT color="#0000FF" SIZE=4 FACE=ARIAL><B>SMD TRIM-POT CROSS REFERENCE</B></FONT>
<P>
<FONT SIZE=4 FACE=ARIAL><B>MULTI-TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3224G<BR>
3224J<BR>
3224W<BR>
3269P<BR>
3269W<BR>
3269X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
44G<BR>
44J<BR>
44W<BR>
84P<BR>
84W<BR>
84X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST63Z<BR>
ST63Y<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
ST5P<BR>
ST5W<BR>
ST5X<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
</TD>
</TR>
<TR>
<TD COLSPAN=7>
<FONT SIZE=4 FACE=ARIAL><B>SINGLE TURN</B></FONT>
</TD>
</TR>
<TR>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BOURNS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>BI TECH</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>DALE-VISHAY</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PHILIPS/MEPCO</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>PANASONIC</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>TOCOS</B></FONT>
</TD>
<TD>
<FONT SIZE=3 FACE=ARIAL><B>AUX/KYOCERA</B></FONT>
</TD>
</TR>
<TR>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
3314G<BR>
3314J<BR>
3364A/B<BR>
3364C/D<BR>
3364W/X<BR>
3313G<BR>
3313J<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
23B<BR>
23A<BR>
21X<BR>
21W<BR>
-<BR>
22B<BR>
22A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST5YL/ST53YL<BR>
ST5YJ/5T53YJ<BR>
ST-23A<BR>
ST-22B<BR>
ST-22<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
ST-4B<BR>
ST-4A<BR>
-<BR>
-<BR>
-<BR>
ST-3B<BR>
ST-3A<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
EVM-6YS<BR>
EVM-1E<BR>
EVM-1G<BR>
EVM-1D<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
G4B<BR>
G4A<BR>
TR04-3S1<BR>
TRG04-2S1<BR>
-<BR>
-<BR>
-<BR></FONT>
</TD>
<TD BGCOLOR="#cccccc" ALIGN=CENTER><FONT FACE=ARIAL SIZE=3>
-<BR>
-<BR>
DVR-43A<BR>
CVR-42C<BR>
CVR-42A/C<BR>
-<BR>
-<BR></FONT>
</TD>
</TR>
</TABLE>
<P>
<FONT SIZE=4 FACE=ARIAL><B>ALT = ALTERNATE</B></FONT>
<P>
<P>
</td>
</tr>
</table>
</BODY></HTML><b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>>NAME>VALUE<b>RESISTOR</b> wave soldering<p>>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE<b>RESISTOR</b><p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf>NAME>VALUE<b>RESISTOR</b> wave soldering<p>
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.10 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.12 W>NAME>VALUE<b>RESISTOR</b><p>
MELF 0.25 W>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0204, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 10 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 12 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 15mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0207, grid 7.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 10mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0411, grid 3.81 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0414, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 17.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0617, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 22.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0613, grid 15 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0817, grid 22.5 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type 0817, grid 6.35 mm>NAME>VALUE0817<b>RESISTOR</b><p>
type V234, grid 12.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type V235, grid 17.78 mm>NAME>VALUE<b>RESISTOR</b><p>
type V526-0, grid 2.5 mm>NAME>VALUE<b>Mini MELF 0102 Axial</b>>NAME>VALUE<b>RESISTOR</b><p>
type 0922, grid 7.5 mm>NAME>VALUE0922<b>CECC Size RC2211</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC2211</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC3715</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Reflow Soldering<p>
source Beyschlag>NAME>VALUE<b>CECC Size RC6123</b> Wave Soldering<p>
source Beyschlag>NAME>VALUE<b>RESISTOR</b><p>
type RDH, grid 15 mm>NAME>VALUERDH<b>RESISTOR</b><p>
type 0204, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b><p>
type 0309, grid 2.5 mm>NAME>VALUE<b>RESISTOR</b> chip<p>
Source: http://www.vishay.com/docs/20008/dcrcw.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC55<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RNC60<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR52<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR53<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR54<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR55<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Bulk Metal® Foil Technology</b>, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements<p>
MIL SIZE RBR56<br>
Source: VISHAY .. vta56.pdf>NAME>VALUE<b>Package 4527</b><p>
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>Wirewound Resistors, Precision Power</b><p>
Source: VISHAY wscwsn.pdf>NAME>VALUE<b>CRCW1218 Thick Film, Rectangular Chip Resistors</b><p>
Source: http://www.vishay.com .. dcrcw.pdf>NAME>VALUE<b>Chip Monolithic Ceramic Capacitors</b> Medium Voltage High Capacitance for General Use<p>
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf>NAME>VALUE>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 2.5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 3 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 4 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 5 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm, outline 6 x 5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 mm + 5 mm, outline 2.4 x 7 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 2.5 + 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.4 x 4.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 2.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 4.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 5.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
Horizontal, grid 5 mm, outline 7.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 3.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 4.2 x 10.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 5.2 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 4.3 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 5.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm, outline 6.4 x 13.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 5.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 6.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 7.2 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 8.4 x 18.3 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 15 mm, outline 9.1 x 18.2 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 6.2 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 7.4 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 8.7 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 10.8 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 22.5 mm, outline 11.3 x 26.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 9.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 11.3 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 13.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 20.5 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 13.7 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 16.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 32.5 mm, outline 18.2 x 37.4 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 19.2 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 20.3 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 5 mm, outline 3.5 x 7.5 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 37.5 mm, outline 15.5 x 41.8 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 7.5 mm, outline 6.3 x 10.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 15.4 x 31.6 mm>NAME>VALUE<b>CAPACITOR</b><p>
grid 27.5 mm, outline 17.3 x 31.6 mm>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0204 reflow solder</b><p>
Metric Code Size 1005>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0603 reflow solder</b><p>
Metric Code Size 1608>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 0805 reflow solder</b><p>
Metric Code Size 2012>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1206 reflow solder</b><p>
Metric Code Size 3216>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1210 reflow solder</b><p>
Metric Code Size 3225>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1812 reflow solder</b><p>
Metric Code Size 4532>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 1825 reflow solder</b><p>
Metric Code Size 4564>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2220 reflow solder</b><p>Metric Code Size 5650>NAME>VALUE<b>Ceramic Chip Capacitor KEMET 2225 reflow solder</b><p>Metric Code Size 5664>NAME>VALUE<b> </b><p>
Source: http://www.vishay.com/docs/10129/hpc0201a.pdf>NAME>VALUESource: http://www.avxcorp.com/docs/catalogs/cx5r.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b><p>
Source: AVX .. aphvc.pdf>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUERESISTORRESISTORRESISTORRESISTOR wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTORRESISTOR
wave solderingRESISTOR
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdfRESISTOR wave soldering
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdfRESISTOR
MELF 0.10 WRESISTOR
MELF 0.25 WRESISTOR
MELF 0.12 WRESISTOR
MELF 0.10 WRESISTOR
MELF 0.25 WRESISTOR
MELF 0.25 WRESISTOR
MELF 0.12 WRESISTOR
MELF 0.25 WRESISTOR
type 0204, grid 5 mmRESISTOR
type 0204, grid 7.5 mmRESISTOR
type 0207, grid 10 mmRESISTOR
type 0207, grid 12 mmRESISTOR
type 0207, grid 15mmRESISTOR
type 0207, grid 2.5 mmRESISTOR
type 0207, grid 5 mmRESISTOR
type 0207, grid 7.5 mmRESISTOR
type 0309, grid 10mmRESISTOR
type 0309, grid 12.5 mmRESISTOR
type 0411, grid 12.5 mmRESISTOR
type 0411, grid 15 mmRESISTOR
type 0411, grid 3.81 mmRESISTOR
type 0414, grid 15 mmRESISTOR
type 0414, grid 5 mmRESISTOR
type 0617, grid 17.5 mmRESISTOR
type 0617, grid 22.5 mmRESISTOR
type 0617, grid 5 mmRESISTOR
type 0922, grid 22.5 mmRESISTOR
type 0613, grid 5 mmRESISTOR
type 0613, grid 15 mmRESISTOR
type 0817, grid 22.5 mmRESISTOR
type 0817, grid 6.35 mmRESISTOR
type V234, grid 12.5 mmRESISTOR
type V235, grid 17.78 mmRESISTOR
type V526-0, grid 2.5 mmMini MELF 0102 AxialRESISTOR
type 0922, grid 7.5 mmCECC Size RC2211 Reflow Soldering
source BeyschlagCECC Size RC2211 Wave Soldering
source BeyschlagCECC Size RC3715 Reflow Soldering
source BeyschlagCECC Size RC3715 Wave Soldering
source BeyschlagCECC Size RC6123 Reflow Soldering
source BeyschlagCECC Size RC6123 Wave Soldering
source BeyschlagRESISTOR
type RDH, grid 15 mmRESISTOR
type 0204, grid 2.5 mmRESISTOR
type 0309, grid 2.5 mmRESISTOR chip
Source: http://www.vishay.com/docs/20008/dcrcw.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC55
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC60
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR52
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR53
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR54
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR55
Source: VISHAY .. vta56.pdfBulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR56
Source: VISHAY .. vta56.pdfPackage 4527
Source: http://www.vishay.com/docs/31059/wsrhigh.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfWirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdfCRCW1218 Thick Film, Rectangular Chip Resistors
Source: http://www.vishay.com .. dcrcw.pdfChip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use
Source: http://www.murata.com .. GRM43DR72E224KW01.pdfCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITORCAPACITOR
grid 2.5 mm, outline 2.4 x 4.4 mmCAPACITOR
grid 2.5 mm, outline 2.5 x 5 mmCAPACITOR
grid 2.5 mm, outline 3 x 5 mmCAPACITOR
grid 2.5 mm, outline 4 x 5 mmCAPACITOR
grid 2.5 mm, outline 5 x 5 mmCAPACITOR
grid 2.5 mm, outline 6 x 5 mmCAPACITOR
grid 2.5 mm + 5 mm, outline 2.4 x 7 mmCAPACITOR
grid 2.5 + 5 mm, outline 2.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 3.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 4.5 x 7.5 mmCAPACITOR
grid 2.5 + 5 mm, outline 5.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 2.4 x 4.4 mmCAPACITOR
grid 5 mm, outline 2.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 4.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 3 x 7.5 mmCAPACITOR
grid 5 mm, outline 5 x 7.5 mmCAPACITOR
grid 5 mm, outline 5.5 x 7.5 mmCAPACITOR
grid 5 mm, outline 7.5 x 7.5 mmCAPACITOR
Horizontal, grid 5 mm, outline 7.5 x 7.5 mmCAPACITOR
grid 7.5 mm, outline 3.2 x 10.3 mmCAPACITOR
grid 7.5 mm, outline 4.2 x 10.3 mmCAPACITOR
grid 7.5 mm, outline 5.2 x 10.6 mmCAPACITOR
grid 10.2 mm, outline 4.3 x 13.3 mmCAPACITOR
grid 10.2 mm, outline 5.4 x 13.3 mmCAPACITOR
grid 10.2 mm, outline 6.4 x 13.3 mmCAPACITOR
grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mmCAPACITOR
grid 15 mm, outline 5.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 6.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 7.2 x 18.3 mmCAPACITOR
grid 15 mm, outline 8.4 x 18.3 mmCAPACITOR
grid 15 mm, outline 9.1 x 18.2 mmCAPACITOR
grid 22.5 mm, outline 6.2 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 7.4 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 8.7 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 10.8 x 26.8 mmCAPACITOR
grid 22.5 mm, outline 11.3 x 26.8 mmCAPACITOR
grid 27.5 mm, outline 9.3 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 11.3 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 13.4 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 20.5 x 31.6 mmCAPACITOR
grid 32.5 mm, outline 13.7 x 37.4 mmCAPACITOR
grid 32.5 mm, outline 16.2 x 37.4 mmCAPACITOR
grid 32.5 mm, outline 18.2 x 37.4 mmCAPACITOR
grid 37.5 mm, outline 19.2 x 41.8 mmCAPACITOR
grid 37.5 mm, outline 20.3 x 41.8 mmCAPACITOR
grid 5 mm, outline 3.5 x 7.5 mmCAPACITOR
grid 37.5 mm, outline 15.5 x 41.8 mmCAPACITOR
grid 7.5 mm, outline 6.3 x 10.6 mmCAPACITOR
grid 27.5 mm, outline 15.4 x 31.6 mmCAPACITOR
grid 27.5 mm, outline 17.3 x 31.6 mmCeramic Chip Capacitor KEMET 0204 reflow solder
Metric Code Size 1005Ceramic Chip Capacitor KEMET 0603 reflow solder
Metric Code Size 1608Ceramic Chip Capacitor KEMET 0805 reflow solder
Metric Code Size 2012Ceramic Chip Capacitor KEMET 1206 reflow solder
Metric Code Size 3216Ceramic Chip Capacitor KEMET 1210 reflow solder
Metric Code Size 3225Ceramic Chip Capacitor KEMET 1812 reflow solder
Metric Code Size 4532Ceramic Chip Capacitor KEMET 1825 reflow solder
Metric Code Size 4564Ceramic Chip Capacitor KEMET 2220 reflow solderMetric Code Size 5650Ceramic Chip Capacitor KEMET 2225 reflow solderMetric Code Size 5664
Source: http://www.vishay.com/docs/10129/hpc0201a.pdfSource: http://www.avxcorp.com/docs/catalogs/cx5r.pdfCAPACITOR
Source: AVX .. aphvc.pdfCAPACITOR
Source: AVX .. aphvc.pdfCAPACITOR>NAME>VALUE>NAME>VALUE<B>RESISTOR</B>, American symbol<B>CAPACITOR</B>, European symbolPCB EdgeAmphenol FCI 10118194-0001LF
Micro USB B portUSBVoltage DividerPower SupplyClock OcillatorReset SwitchLCD Backlight9-DOFProgramming Port
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.