RedBoot> fis load -b 0x100000 kernelA ... Read from 0x07ee0000-0x07eff000 at 0x1ff60000: .. ... Read from 0x00100000-0x00500000 at 0x00180000: ................................. RedBoot> exec -b 0x100000 -l 0x400000 -c "console=ttymxc0 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw init=/linuxrc ip=none" entry=0x90008000, target=0x90008000 Uncompressing Linux..................................................................................................................................................... done, booting the kernel. Linux version 2.6.31 (g600030@OSN08008.osn.sagem) (gcc version 4.1.2) #1 Tue Jun 7 14:06:48 CEST 2011 CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache Machine: Sagemcom MX51 Turbo Memory policy: ECC disabled, Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 Kernel command line: console=ttymxc0 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw init=/linuxrc ip=none PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512MB = 512MB total Memory: 514748KB available (3960K code, 365K data, 492K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:368 MXC IRQ initialized MXC_Early serial console at MMIO 0x73fbc000 (options '115200') console [ttymxc0] enabled Console: colour dummy device 80x30 Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok regulator: core version 0.5 NET: Registered protocol family 16 i.MX IRAM pool: 128 KB@0xe0840000 IRAM READY evtprobe: loaded with success CPU is i.MX51 Revision 3.0 MXC GPIO hardware TSV3 Applying PR IO configuration init_i2c_boards: REGISTERING MAX9880 _n Turbo platform devices initialised successfully... Using SDMA I.API MXC DMA API initialized bio: create slab at 0 SCSI subsystem initialized CSPI: mxc_spi-0 probed CSPI: mxc_spi-2 probed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb MXC I2C driver MXC HS I2C driver IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized mc13892 Rev 2.0 FinVer 2 detected Initializing regulators for Turbo Board. regulator: SW1: 600 <--> 1375 mV regulator: SW2: 900 <--> 1850 mV regulator: SW3: 1200 mV regulator: SW4: 1800 mV regulator: SWBST: 0 mV regulator: VIOHI: 2775 mV regulator: VPLL: 1800 mV regulator: VDIG: 1250 mV regulator: VSD: 3150 mV regulator: VUSB2: 2600 mV regulator: VVIDEO: 2600 mV regulator: VAUDIO: 3000 mV regulator: VCAM: 2750 mV fast normal regulator: VGEN1: 2850 mV regulator: VGEN2: 3150 mV regulator: VGEN3: 2900 mV regulator: VUSB: 0 mV regulator: GPO1: 0 mV regulator: GPO2: 0 mV regulator: GPO3: 0 mV regulator: GPO4: 0 mV mc13892_regulator_init: Registered ON/OFF button Device spi1.0 probed NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered NET: Registered protocol family 1 LPMode driver module loaded Static Power Management for Freescale i.MX5 PM driver module loaded sdram autogating driver module loaded Bus freq driver module loaded batt_ch driver loaded successfully mxc_dvfs_core_probe DVFS driver module loaded i.MXC CPU frequency driver DVFS PER driver module loaded NTFS driver 2.1.29 [Flags: R/O]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 1005 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) mxc_ipu mxc_ipu: Channel already disabled 9 mxc_ipu mxc_ipu: Channel already uninitialized 9 Console: switching to colour frame buffer device 100x30 Serial: MXC Internal UART driver mxcintuart.0: ttymxc0 at MMIO 0x73fbc000 (irq = 31) is a Freescale i.MX console handover: boot [ttymxc0] -> real [ttymxc0] mxcintuart.1: ttymxc1 at MMIO 0x73fc0000 (irq = 32) is a Freescale i.MX mxcintuart.2: ttymxc2 at MMIO 0x7000c000 (irq = 33) is a Freescale i.MX brd: module loaded loop: module loaded at24 3-0050: 32768 byte 24c256 EEPROM (writable) usbcore: registered new interface driver asix usbcore: registered new interface driver MOSCHIP usb-ethernet driver Dongle Host Driver, version 4.218.248.6 Progress Bar init ! MXC MTD nand Driver 3.0 NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit) Bad block table not found for chip 0 Bad block table not found for chip 0 Scanning device for bad blocks Searching for RedBoot partition table in NAND 512MiB 3,3V 8-bit at offset 0x1ff60000 9 RedBoot partitions found on MTD device NAND 512MiB 3,3V 8-bit Creating 9 MTD partitions on "NAND 512MiB 3,3V 8-bit": 0x000000000000-0x000000040000 : "RedBoot" 0x000000080000-0x000000180000 : "logo" 0x000000180000-0x000000580000 : "kernelA" 0x000000580000-0x000000980000 : "kernelB" 0x000000980000-0x000008980000 : "rootfsA" 0x000008980000-0x000010980000 : "rootfsB" 0x000010980000-0x00001ff20000 : "userfs" 0x00001ff60000-0x00001ff7f000 : "FIS directory" mtd: partition "FIS directory" doesn't end on an erase block -- force read-only 0x00001ff7f000-0x00001ff80000 : "RedBoot config" mtd: partition "RedBoot config" doesn't start on an erase block boundary -- force read-only UBI: attaching mtd4 to ubi0 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd4 to ubi0 UBI: MTD device name: "rootfsA" UBI: MTD device size: 128 MiB UBI: number of good PEBs: 1024 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 8 UBI: total number of reserved PEBs: 1016 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 2/0 UBI: image sequence number: 1518443028 UBI: background thread "ubi_bgt0d" started, PID 514 SPI dect running in FULL DUPLEX MODE..... ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 18, io base 0x73f80000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. MXC keypad loaded clk: Unable to get requested clock: kpp_clk input: mxckpd as /devices/virtual/input/input0 mc13892 rtc probe start pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc0 mc13892 rtc probe succeed i2c /dev entries driver Linux video capture interface: v2.00 mxc_v4l2_output mxc_v4l2_output.0: Registered device video0 MXC WatchDog Driver 2.0 clk: Unable to get requested clock: wdog_clk MXC Watchdog # 0 Timer: initial timeout 60 sec Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: HCILL protocol initialized PMIC Character device: successfully loaded VPU initialized mxsdhci: MXC Secure Digital Host Controller Interface driver mxsdhci: MXC SDHCI Controller Driver. mmc0: SDHCI detect irq 134 irq 1 INTERNAL DMA mxsdhci: MXC SDHCI Controller Driver. sdhci_probe_slot: MMC1 virtual card eject enabled mmc1: SDHCI detect irq 0 irq 2 INTERNAL DMA Registered led device: pmic_ledsr Registered led device: pmic_ledsg Registered led device: pmic_ledsb usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.20. No device for DAI imx-ssi-1-0 No device for DAI imx-ssi-1-1 No device for DAI imx-ssi-2-0 No device for DAI imx-ssi-2-1 snd_soc_instantiate_card: Wired fix 2 DMA Sound Buffers Allocated:UseIram=0 buf->addr=ae320000 buf->area=fae25000 size=65536 DMA Sound Buffers Allocated:UseIram=0 buf->addr=ae330000 buf->area=fae35000 size=65536 asoc: MAX9880 <-> imx-ssi-1-0 mapping ok Failed to add route Line Input->Output Mixer ALSA device list: #0: imx-audio-codec (MAX9880) Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 ThumbEE CPU extension supported. Enabling P5V regulator mxci2c_wait_writefifo:wait error mmc1: new SDIO card at address 0001 eth0: Broadcom Dongle Host Driver max9880_manage_irq: Unhandled interrupt SLD FZ: version 1 successfully loaded with major 247 VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2 regulator_init_complete: disabling GPO4 regulator_init_complete: disabling GPO2 regulator_init_complete: disabling GPO1 regulator_init_complete: disabling VUSB regulator_init_complete: disabling VVIDEO regulator_init_complete: disabling VSD regulator_init_complete: disabling SWBST input: mxc_ts as /devices/virtual/input/input1 mxc input touchscreen loaded pmic_rtc pmic_rtc.1: setting system clock to 2011-03-15 13:59:49 UTC (1300197589) UBIFS: mounted UBI device 0, volume 0, name "rootfs" UBIFS: file system size: 128894976 bytes (125874 KiB, 122 MiB, 999 LEBs) UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) VFS: Mounted root (ubifs filesystem) on device 0:12. Freeing init memory: 492K Failed to execute /linuxrc. Attempting defaults... init started: BusyBox v1.11.2 () starting pid 605, tty '': '/etc/rc.d/rcS' Setting the hostname to turboscreen Mounting /proc and /sys Starting the hotplug events dispatcher udevd Synthesizing initial hotplug events Mounting filesystems as read only Remount read only done UBI: attaching mtd6 to ubi1 UBI: physical eraseblock size: 131072 bytes (128 KiB) UBI: logical eraseblock size: 129024 bytes UBI: smallest flash I/O unit: 2048 UBI: sub-page size: 512 UBI: VID header offset: 512 (aligned 512) UBI: data offset: 2048 UBI: attached mtd6 to ubi1 UBI: MTD device name: "userfs" UBI: MTD device size: 245 MiB UBI: number of good PEBs: 1965 UBI: number of bad PEBs: 0 UBI: max. allowed volumes: 128 UBI: wear-leveling threshold: 4096 UBI: number of internal volumes: 1 UBI: number of user volumes: 1 UBI: available PEBs: 17 UBI: total number of reserved PEBs: 1948 UBI: number of PEBs reserved for bad PEB handling: 2 UBI: max/mean erase counter: 4/2 UBI: image sequence number: 1692971885 UBI: background thread "ubi_bgt1d" started, PID 1089 UBI device number 1, total 1965 LEBs (253532160 bytes, 241.8 MiB), available 17 LEBs (2193408 bytes, 2.1 MiB), LEB size 129024 bytes (126.0 KiB) UBIFS: recovery needed UBIFS: recovery completed UBIFS: mounted UBI device 1, volume 0, name "userfs" UBIFS: file system size: 243726336 bytes (238014 KiB, 232 MiB, 1889 LEBs) UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: lzo UBIFS: reserved for root: 0 bytes (0 KiB) Setting up networking on loopback device eth1: unknown interface: No such device Starting syslogd and klogd Dect Handset firmware version MODULE-TELSTRA-V1.01N matches with the already retrofitted one software_version=001.004.007 dev_info_swv=1.04G software_version_3M=3000372494 serial_number=M211150T6OW9644 provisioning_code=52HR-2374-22A2-2222-32ZF hardware_version_no=002.003.001 The default parameter is set successfully:'Device.DeviceInfo.SoftwareVersion' = '3000372494' The default parameter is set successfully:'Device.DeviceInfo.SerialNumber' = 'M211150T6OW9644' The default parameter is set successfully:'Device.DeviceInfo.ProvisioningCode' = '52HR-2374-22A2-2222-32ZF' The default parameter is set successfully:'Device.DeviceInfo.HardwareVersion' = '002.003.001' Starting iptables: Start cron Starting service monitor Starting the sshd server: SERVICE-MONITOR: starting system-service starting pid 1766, tty '': '/sbin/getty -n -L ttymxc0 115200 vt100' turboscreen login: * TRACE LEVEL : 0 * HW_MEMORY_SIZE : 256 Disabling protocol version 1. Could not load host key * Delays configured [OK] * Registred new application network-service [OK] * Registred new application launch-service [OK] * Registred new application thttpd [OK] * Registred new application dect-service [OK] * Registred new application dlna-renderer [OK] * Registred new application notification [OK] * Registred new application tr69-process [OK] * Registred new application tr69-service [OK] * Registred new application filemanager_process [OK] * Registred new application voicemail-service [OK] * Registred new application yellow-white-service [OK] * Registred new application internet-radio-application-service[OK] * Registred new application device-activation-service [OK] * Registred new application imageprocessing_process [OK] * Registred new application opera [OK] * Registred new application syncml [OK] * Parsing Configuration file /etc/symon.conf [OK] * SHM creation [OK] * SHM ftruncate [OK] * SHM mapping [OK] * Initializing MsgLib for : EventMonitor_usbnotify [OK] * Initializing MsgLib for : TimeMonitor_alrnotify [OK] * EVENT MONITOR [OK] * Parsing USB ids file [OK] * HEALTH MONITOR [OK] * Application launched network-service [OK] * Application launched launch-service [OK] * Application launched thttpd [OK] * Application launched dect-service [OK] * Application launched tr69-process [OK] * Application launched filemanager_process [OK] * Application launched voicemail-service [OK] * Application launched yellow-white-service [OK] * Application launched internet-radio-application-service[OK] * Application launched device-activation-service [OK] * Application launched imageprocessing_process [OK] Return_dpc value is : 0 * Application launched tr69-service [OK] * Application launched dlna-renderer [OK] * Application launched notification [OK] * Application launched opera [OK]