<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.7.0">
<drawing>
<board>
<plain>
<wire x1="0" y1="35.56" x2="0" y2="0" width="0" layer="20"/>
<wire x1="0" y1="0" x2="80.01" y2="0" width="0" layer="20"/>
<wire x1="80.01" y1="0" x2="80.01" y2="35.56" width="0" layer="20"/>
<wire x1="80.01" y1="35.56" x2="0" y2="35.56" width="0" layer="20"/>
<text>Toast-R-Reflow
Ctrl Backpack II v1.0</text>
<text>+</text>
<text>-</text>
<text>Geppetto
Electronics</text>
<text>BLK</text>
<text>THERMO</text>
<text>GND</text>
<text>1</text>
<text>2</text>
<text>GND</text>
<text>UP</text>
<text>DN</text>
<text>SEL</text>
</plain>
<libraries>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SCREWTERMINAL-5MM-3">
</package>
<package name="FTDI_BASIC">
</package>
<package name="1X04">
</package>
<package name="1X02_2.54_SCREWTERM">
</package>
</packages>
</library>
<library name="avr-7">
<description>&lt;b&gt;AVR Devices&lt;/b&gt;&lt;p&gt;
Version 7 - August 1, 2011.&lt;br&gt;&lt;br&gt;
Added ATmega164P/324P/644P devices for DIP and TQFP.
&lt;p&gt;
Version 4 - March 11, 2008.&lt;br&gt;&lt;br&gt;
This library now includes ONLY ATMEL AVR microcontrollers.  It is the result of merging all other available device libraries available at http://www.cadsoft.de/download as of the time it was made.  In addition to the legacy AT90* devices, it includes most ATMEGA devices including the new 48/88/168, most ATTiny devices and a set of ISP and JTAG pin headers.&lt;p&gt;
Based on the following sources:&lt;p&gt;
&lt;ul&gt;
&lt;li&gt;www.atmel.com
&lt;li&gt; file at90smcu_v400.zip
&lt;li&gt;avr.lbr and atmel.lbr as provided by CadSoft
&lt;li&gt;avr-1.lbr by David Blundell
&lt;li&gt;avr-2.lbr by Boris Zalokar
&lt;li&gt;avr-3.lbr by Carson Reynolds
&lt;li&gt;attiny24_44_84.lbr by Pawel Szramowski (ATTiny24/44/84 devices)
&lt;li&gt;atmel.lbr by Bob Starr (ISP headers)
&lt;li&gt;moates_custom_parts.lbr (edge ISP)
&lt;li&gt;other misc sources
&lt;/ul&gt;
&lt;author&gt;Revised by David Blundell (blundar at gmail dot com) and others.&lt;/author&gt;
&lt;p&gt;
&lt;author&gt;Added Mega162, Tiny2313 John Lussmyer (cougar at casadelgato.com)&lt;/author&gt;
&lt;p&gt;
&lt;author&gt;Added XMega A1,A3,A4,D3,D4 John Lussmyer Aug 1, 2011(cougar at casadelgato.com)&lt;/author&gt;</description>
<packages>
<package name="AVR-ISP-6">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;&lt;p&gt; JTAG 6 Pin, 0.1" Straight</description>
</package>
<package name="TQFP32-08">
<description>&lt;B&gt;Thin Plasic Quad Flat Package&lt;/B&gt; Grid 0.8 mm</description>
</package>
</packages>
</library>
<library name="linear">
<description>&lt;b&gt;Linear Devices&lt;/b&gt;&lt;p&gt;
Operational amplifiers,  comparators, voltage regulators, ADCs, DACs, etc.&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="TO252">
<description>&lt;b&gt;SMALL OUTLINE TRANSISTOR&lt;/b&gt;&lt;p&gt;
TS-003</description>
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="diode">
<description>&lt;b&gt;Diodes&lt;/b&gt;&lt;p&gt;
Based on the following sources:
&lt;ul&gt;
&lt;li&gt;Motorola : www.onsemi.com
&lt;li&gt;Fairchild : www.fairchildsemi.com
&lt;li&gt;Philips : www.semiconductors.com
&lt;li&gt;Vishay : www.vishay.de
&lt;/ul&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="DO-214AC">
<description>&lt;b&gt;SURFACE MOUNT GENERAL RECTIFIER&lt;/b&gt; JEDEC DO-214AC molded platic body&lt;p&gt;
Method 2026&lt;br&gt;
Source: http://www.kingtronics.com/SMD_M7/M7_SMD_4007.pdf</description>
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="OSHW-LOGO-M">
</package>
</packages>
</library>
<library name="SparkFun-Resistors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SJ_2S-NO">
<description>Small solder jumper with no paste layer so it will open after reflow.</description>
</package>
</packages>
</library>
<library name="SparkFun-Displays">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find all manner of display devices- LED displays, LCD displays, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="LCD-16X2_NOSILK">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="TRIMPOT-3MM">
</package>
</packages>
</library>
<library name="SparkFun-PowerIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SOT23-5">
<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="adafruit">
<packages>
<package name="SO08">
</package>
<package name="NX3225">
</package>
<package name="EVQ-Q2">
</package>
<package name="DCJACK_2MM_SMT">
<description>2.0/2.1mm DC Jack - SMT
&lt;p&gt;4UConnector: 03267&lt;/p&gt;
&lt;p&gt;Note: Small tRestrict polygon's were added to the ground pads to improve solderability when this part is used in combination with a ground pour.  By default, Eagle will product four large bridges to the ground pour significantly increasing the heat distribution on the pads and preventing lead-free solder from reflowing in certain situations.  For more details, see: http://www.microbuilder.eu/Blog/09-12-14/Reducing_Thermals_for_Large_Pads_in_Eagle.aspx&lt;/p&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-DiscreteSemi">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SOD-323">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="R1" library="SparkFun-Resistors" package="0805" value="10k"/>
<element name="R3" library="SparkFun-Resistors" package="0805" value="150"/>
<element name="R5" library="SparkFun-Resistors" package="0805" value="150"/>
<element name="JP3" library="SparkFun-Connectors" package="SCREWTERMINAL-5MM-3" value="OVEN">
<attribute name="VALUE"/>
</element>
<element name="IC3" library="linear" package="TO252" value="7805DT">
<attribute name="NAME"/>
</element>
<element name="JP4" library="avr-7" package="AVR-ISP-6" value="ISP">
<attribute name="VALUE"/>
</element>
<element name="C1" library="SparkFun-Capacitors" package="0805" value="0.33uF"/>
<element name="C3" library="SparkFun-Capacitors" package="0805" value="0.1uF">
<attribute name="NAME"/>
</element>
<element name="C2" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="D1" library="diode" package="DO-214AC" value="S1M">
<attribute name="NAME"/>
</element>
<element name="U$1" library="SparkFun-Aesthetics" package="OSHW-LOGO-M" value=""/>
<element name="U1" library="SparkFun-Displays" package="LCD-16X2_NOSILK" value="LCD-16X2NOSILK"/>
<element name="C8" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="R9" library="SparkFun-Resistors" package="0805" value="0"/>
<element name="C9" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="R12" library="SparkFun-Electromechanical" package="TRIMPOT-3MM" value="20k"/>
<element name="JP6" library="SparkFun-Connectors" package="FTDI_BASIC" value="FTDI">
<attribute name="VALUE"/>
</element>
<element name="C10" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="IC1" library="avr-7" package="TQFP32-08" value="MEGA8-AI">
<attribute name="NAME"/>
</element>
<element name="C11" library="SparkFun-Capacitors" package="0805" value="22pF">
<attribute name="NAME"/>
</element>
<element name="C12" library="SparkFun-Capacitors" package="0805" value="22pF">
<attribute name="NAME"/>
</element>
<element name="IC4" library="SparkFun-PowerIC" package="SOT23-5" value="3.3v">
<attribute name="NAME"/>
</element>
<element name="C13" library="SparkFun-Capacitors" package="0805" value="2.2uF"/>
<element name="C14" library="SparkFun-Capacitors" package="0805" value="1uF"/>
<element name="JP2" library="SparkFun-Connectors" package="1X04" value="BUTTONS">
<attribute name="VALUE"/>
</element>
<element name="SJ1" library="SparkFun-Passives" package="SJ_2S-NO" value="DTR_RESET">
<attribute name="VALUE"/>
</element>
<element name="IC2" library="adafruit" package="SO08" value="MAX31855">
<attribute name="NAME"/>
</element>
<element name="D2" library="SparkFun-DiscreteSemi" package="SOD-323" value="1N4148"/>
<element name="D3" library="SparkFun-DiscreteSemi" package="SOD-323" value="1N4148"/>
<element name="R2" library="SparkFun-Resistors" package="0805" value="10k"/>
<element name="R4" library="SparkFun-Resistors" package="0805" value="10k"/>
<element name="C5" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="JP1" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="THERMO"/>
<element name="C4" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="C6" library="SparkFun-Capacitors" package="0805" value=".01uF"/>
<element name="FB2" library="SparkFun-Resistors" package="0805" value="470"/>
<element name="FB1" library="SparkFun-Resistors" package="0805" value="470"/>
<element name="Q1" library="adafruit" package="NX3225" value=""/>
<element name="R6" library="SparkFun-Resistors" package="0805" value="1k"/>
<element name="R7" library="SparkFun-Resistors" package="0805" value="1k"/>
<element name="R8" library="SparkFun-Resistors" package="0805" value="1k"/>
<element name="SW1" library="adafruit" package="EVQ-Q2" value="SELECT">
<attribute name="VALUE"/>
</element>
<element name="U$2" library="adafruit" package="DCJACK_2MM_SMT" value="2.1MMJACKSMT"/>
</elements>
<signals>
<signal name="GND">
<contactref element="JP3" pad="1"/>
<contactref element="IC3" pad="3"/>
<contactref element="C1" pad="2"/>
<contactref element="D1" pad="A"/>
<contactref element="JP4" pad="6"/>
<contactref element="C2" pad="2"/>
<contactref element="C3" pad="2"/>
<contactref element="U1" pad="1"/>
<contactref element="U1" pad="16"/>
<contactref element="C8" pad="2"/>
<contactref element="C9" pad="2"/>
<contactref element="R12" pad="3"/>
<contactref element="JP6" pad="GND"/>
<contactref element="IC1" pad="21"/>
<contactref element="IC1" pad="5"/>
<contactref element="IC1" pad="3"/>
<contactref element="C12" pad="1"/>
<contactref element="C11" pad="1"/>
<contactref element="IC4" pad="2"/>
<contactref element="C14" pad="1"/>
<contactref element="C13" pad="1"/>
<contactref element="JP2" pad="1"/>
<contactref element="IC2" pad="1"/>
<contactref element="C5" pad="2"/>
<contactref element="C4" pad="2"/>
<contactref element="Q1" pad="2"/>
<contactref element="Q1" pad="4"/>
<contactref element="U1" pad="5"/>
<contactref element="SW1" pad="A'"/>
<contactref element="SW1" pad="A"/>
<contactref element="U$2" pad="GNDBREAK"/>
<contactref element="U$2" pad="GND"/>
</signal>
<signal name="+5V">
<contactref element="R1" pad="1"/>
<contactref element="IC3" pad="2"/>
<contactref element="JP4" pad="2"/>
<contactref element="C3" pad="1"/>
<contactref element="C2" pad="1"/>
<contactref element="U1" pad="2"/>
<contactref element="R9" pad="1"/>
<contactref element="C8" pad="1"/>
<contactref element="C9" pad="1"/>
<contactref element="R12" pad="1"/>
<contactref element="JP6" pad="VCC"/>
<contactref element="IC1" pad="6"/>
<contactref element="IC1" pad="4"/>
<contactref element="IC1" pad="18"/>
<contactref element="IC4" pad="3"/>
<contactref element="IC4" pad="1"/>
<contactref element="C14" pad="2"/>
</signal>
<signal name="!RESET">
<contactref element="R1" pad="2"/>
<contactref element="JP4" pad="5"/>
<contactref element="IC1" pad="29"/>
<contactref element="SJ1" pad="1"/>
</signal>
<signal name="SCK/LCD-D7">
<contactref element="JP4" pad="3"/>
<contactref element="IC1" pad="17"/>
<contactref element="D3" pad="1"/>
<contactref element="R8" pad="1"/>
</signal>
<signal name="MISO/LCD-D6">
<contactref element="JP4" pad="1"/>
<contactref element="IC1" pad="16"/>
<contactref element="IC2" pad="7"/>
<contactref element="R7" pad="1"/>
</signal>
<signal name="MOSI/LCD-D5">
<contactref element="JP4" pad="4"/>
<contactref element="IC1" pad="15"/>
<contactref element="R6" pad="1"/>
</signal>
<signal name="OUT1">
<contactref element="R3" pad="2"/>
<contactref element="JP3" pad="2"/>
</signal>
<signal name="OUT2">
<contactref element="R5" pad="2"/>
<contactref element="JP3" pad="3"/>
</signal>
<signal name="N$7">
<contactref element="IC3" pad="1"/>
<contactref element="C1" pad="1"/>
<contactref element="D1" pad="C"/>
<contactref element="U$2" pad="PWR2"/>
<contactref element="U$2" pad="PWR1"/>
</signal>
<signal name="N$3">
<contactref element="R9" pad="2"/>
<contactref element="U1" pad="15"/>
</signal>
<signal name="LCD-D4">
<contactref element="U1" pad="11"/>
<contactref element="IC1" pad="14"/>
</signal>
<signal name="LCD-RS">
<contactref element="U1" pad="4"/>
<contactref element="IC1" pad="13"/>
</signal>
<signal name="LCD-E">
<contactref element="U1" pad="6"/>
<contactref element="IC1" pad="12"/>
</signal>
<signal name="N$4">
<contactref element="U1" pad="3"/>
<contactref element="R12" pad="2"/>
</signal>
<signal name="OVEN1">
<contactref element="R5" pad="1"/>
<contactref element="IC1" pad="32"/>
</signal>
<signal name="OVEN2">
<contactref element="R3" pad="1"/>
<contactref element="IC1" pad="1"/>
</signal>
<signal name="N$6">
<contactref element="JP6" pad="DTR"/>
<contactref element="C10" pad="2"/>
</signal>
<signal name="N$9">
<contactref element="C10" pad="1"/>
<contactref element="SJ1" pad="2"/>
</signal>
<signal name="RXD">
<contactref element="JP6" pad="TXO"/>
<contactref element="IC1" pad="30"/>
</signal>
<signal name="TXD">
<contactref element="JP6" pad="RXI"/>
<contactref element="IC1" pad="31"/>
</signal>
<signal name="N$11">
<contactref element="C11" pad="2"/>
<contactref element="IC1" pad="8"/>
<contactref element="Q1" pad="3"/>
</signal>
<signal name="N$12">
<contactref element="IC1" pad="7"/>
<contactref element="C12" pad="2"/>
<contactref element="Q1" pad="1"/>
</signal>
<signal name="UP">
<contactref element="JP2" pad="2"/>
<contactref element="IC1" pad="9"/>
</signal>
<signal name="DOWN">
<contactref element="JP2" pad="3"/>
<contactref element="IC1" pad="10"/>
</signal>
<signal name="SELECT">
<contactref element="JP2" pad="4"/>
<contactref element="IC1" pad="2"/>
<contactref element="SW1" pad="B'"/>
<contactref element="SW1" pad="B"/>
</signal>
<signal name="N$1">
<contactref element="IC2" pad="5"/>
<contactref element="R4" pad="2"/>
<contactref element="D3" pad="2"/>
</signal>
<signal name="N$2">
<contactref element="IC2" pad="6"/>
<contactref element="R2" pad="1"/>
<contactref element="D2" pad="2"/>
</signal>
<signal name="!CS_TEMP">
<contactref element="D2" pad="1"/>
<contactref element="IC1" pad="11"/>
</signal>
<signal name="+3V3">
<contactref element="R4" pad="1"/>
<contactref element="R2" pad="2"/>
<contactref element="IC4" pad="5"/>
<contactref element="C13" pad="2"/>
<contactref element="IC2" pad="4"/>
<contactref element="C5" pad="1"/>
</signal>
<signal name="N$8">
<contactref element="IC1" pad="20"/>
<contactref element="C4" pad="1"/>
</signal>
<signal name="N$5">
<contactref element="C6" pad="2"/>
<contactref element="IC2" pad="3"/>
<contactref element="FB2" pad="2"/>
</signal>
<signal name="N$10">
<contactref element="C6" pad="1"/>
<contactref element="IC2" pad="2"/>
<contactref element="FB1" pad="2"/>
</signal>
<signal name="N$13">
<contactref element="JP1" pad="P2"/>
<contactref element="FB1" pad="1"/>
</signal>
<signal name="N$14">
<contactref element="FB2" pad="1"/>
<contactref element="JP1" pad="P1"/>
</signal>
<signal name="N$15">
<contactref element="U1" pad="14"/>
<contactref element="R8" pad="2"/>
</signal>
<signal name="N$16">
<contactref element="U1" pad="13"/>
<contactref element="R7" pad="2"/>
</signal>
<signal name="N$17">
<contactref element="U1" pad="12"/>
<contactref element="R6" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
