<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.7.0">
<drawing>
<board>
<plain>
<wire x1="0" y1="0" x2="54.61" y2="0" width="0" layer="20"/>
<wire x1="54.61" y1="0" x2="54.61" y2="52.07" width="0" layer="20"/>
<wire x1="54.61" y1="52.07" x2="0" y2="52.07" width="0" layer="20"/>
<wire x1="0" y1="52.07" x2="0" y2="0" width="0" layer="20"/>
<text>HOT
IN</text>
<text>OUT1</text>
<text>OUT2</text>
<text>Toast-R-Reflow
Power v0.7</text>
<text>DANGER</text>
<text>HIGH VOLTAGE</text>
<text>DANGER</text>
<text>HIGH
VOLTAGE</text>
<text>Geppetto
Electronics</text>
<text>GND</text>
<text>2</text>
<text>1</text>
</plain>
<libraries>
<library name="triac">
<description>&lt;b&gt;Thyristors, Triacs, Trigger Diodes&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="TO220BV">
<description>&lt;b&gt;Molded Package&lt;/b&gt;&lt;p&gt;
grid 2.54 mm</description>
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SCREWTERMINAL-5MM-3">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="STAND-OFF">
<description>&lt;b&gt;Stand Off&lt;/b&gt;&lt;p&gt;
This is the mechanical footprint for a #4 phillips button head screw. Use the keepout ring to avoid running the screw head into surrounding components. SKU : PRT-00447</description>
</package>
<package name="STANDOFF-ELECTRICAL">
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="OSHW-LOGO-L">
</package>
</packages>
</library>
<library name="QD_PCB">
<packages>
<package name="QD_200">
</package>
</packages>
</library>
<library name="optocoupler">
<description>&lt;b&gt;Opto Couplers&lt;/b&gt;&lt;p&gt;
Siemens, Hewlett-Packard, Texas Instuments, Sharp, Motorola&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="DIL6-SMD">
<description>&lt;b&gt;DIL 6 SMD&lt;/b&gt;&lt;p&gt;
Source: http://www.fairchildsemi.com/pf/4N/4N35-M.html</description>
</package>
</packages>
</library>
<library name="SparkFun-Resistors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1210">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="T2" library="triac" package="TO220BV" value="BTA20">
<attribute name="NAME"/>
</element>
<element name="R1" library="SparkFun-Resistors" package="0805" value="330Ω">
<attribute name="NAME"/>
</element>
<element name="R2" library="SparkFun-Resistors" package="0805" value="330Ω">
<attribute name="NAME"/>
</element>
<element name="R3" library="SparkFun-Resistors" package="0805" value="39Ω">
<attribute name="NAME"/>
</element>
<element name="C1" library="SparkFun-Capacitors" package="1210" value=".01µF">
<attribute name="NAME"/>
</element>
<element name="T1" library="triac" package="TO220BV" value="BTA20">
<attribute name="NAME"/>
</element>
<element name="R4" library="SparkFun-Resistors" package="0805" value="330Ω">
<attribute name="NAME"/>
</element>
<element name="R5" library="SparkFun-Resistors" package="0805" value="330Ω">
<attribute name="NAME"/>
</element>
<element name="R6" library="SparkFun-Resistors" package="0805" value="39Ω">
<attribute name="NAME"/>
</element>
<element name="C2" library="SparkFun-Capacitors" package="1210" value=".01µF">
<attribute name="NAME"/>
</element>
<element name="JP1" library="SparkFun-Connectors" package="SCREWTERMINAL-5MM-3" value="CONTROL"/>
<element name="S1" library="QD_PCB" package="QD_200" value="QD_200"/>
<element name="S2" library="QD_PCB" package="QD_200" value="QD_200"/>
<element name="S3" library="QD_PCB" package="QD_200" value="QD_200"/>
<element name="U$1" library="SparkFun-Aesthetics" package="OSHW-LOGO-L" value=""/>
<element name="U$2" library="SparkFun-Electromechanical" package="STAND-OFF" value=""/>
<element name="U$3" library="SparkFun-Electromechanical" package="STAND-OFF" value=""/>
<element name="U$4" library="SparkFun-Electromechanical" package="STAND-OFF" value=""/>
<element name="U$5" library="SparkFun-Electromechanical" package="STAND-OFF" value=""/>
<element name="OK1" library="optocoupler" package="DIL6-SMD" value="MOC3041S">
<attribute name="MF" value="FAIRCHILD SEMICONDUCTOR"/>
<attribute name="OC_NEWARK" value="05C2885"/>
<attribute name="OC_FARNELL" value="unknown"/>
<attribute name="MPN" value="MOC3041S-M"/>
<attribute name="NAME"/>
</element>
<element name="OK2" library="optocoupler" package="DIL6-SMD" value="MOC3041S">
<attribute name="MF" value="FAIRCHILD SEMICONDUCTOR"/>
<attribute name="OC_NEWARK" value="05C2885"/>
<attribute name="OC_FARNELL" value="unknown"/>
<attribute name="MPN" value="MOC3041S-M"/>
<attribute name="NAME"/>
</element>
<element name="S4" library="SparkFun-Electromechanical" package="STANDOFF-ELECTRICAL" value="STANDOFF_ELECTRICAL"/>
<element name="S5" library="SparkFun-Electromechanical" package="STANDOFF-ELECTRICAL" value="STANDOFF_ELECTRICAL"/>
<element name="S6" library="SparkFun-Electromechanical" package="STANDOFF-ELECTRICAL" value="STANDOFF_ELECTRICAL"/>
<element name="S7" library="SparkFun-Electromechanical" package="STANDOFF-ELECTRICAL" value="STANDOFF_ELECTRICAL"/>
</elements>
<signals>
<signal name="N$1">
<contactref element="R1" pad="2"/>
<contactref element="T2" pad="G"/>
<contactref element="OK1" pad="6"/>
</signal>
<signal name="HOT">
<contactref element="R2" pad="2"/>
<contactref element="R3" pad="2"/>
<contactref element="T2" pad="T2"/>
<contactref element="R5" pad="2"/>
<contactref element="R6" pad="2"/>
<contactref element="T1" pad="T2"/>
<contactref element="S1" pad="P$1"/>
<contactref element="S1" pad="P$2"/>
</signal>
<signal name="OUT1">
<contactref element="R1" pad="1"/>
<contactref element="T2" pad="T1"/>
<contactref element="C1" pad="2"/>
<contactref element="S2" pad="P$1"/>
<contactref element="S2" pad="P$2"/>
</signal>
<signal name="N$5">
<contactref element="R3" pad="1"/>
<contactref element="C1" pad="1"/>
</signal>
<signal name="N$6">
<contactref element="R4" pad="2"/>
<contactref element="T1" pad="G"/>
<contactref element="OK2" pad="4"/>
</signal>
<signal name="N$7">
<contactref element="R5" pad="1"/>
<contactref element="OK2" pad="6"/>
</signal>
<signal name="OUT2">
<contactref element="R4" pad="1"/>
<contactref element="T1" pad="T1"/>
<contactref element="C2" pad="2"/>
<contactref element="S3" pad="P$1"/>
<contactref element="S3" pad="P$2"/>
</signal>
<signal name="N$10">
<contactref element="R6" pad="1"/>
<contactref element="C2" pad="1"/>
</signal>
<signal name="N$11">
<contactref element="JP1" pad="1"/>
<contactref element="OK2" pad="2"/>
<contactref element="OK1" pad="2"/>
</signal>
<signal name="N$12">
<contactref element="JP1" pad="2"/>
<contactref element="OK2" pad="1"/>
</signal>
<signal name="N$13">
<contactref element="JP1" pad="3"/>
<contactref element="OK1" pad="1"/>
</signal>
<signal name="N$2">
<contactref element="R2" pad="1"/>
<contactref element="OK1" pad="4"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
